User Manual: Model Code/s: ECG6 Product: 60cm Gas Cooktop Page:Document: 1 User Manual
Dear Customer, Congratulations on purchasing your new gas cooktop. The Esatto brand is proudly distributed within Australia by Residentia Group Pty Ltd. Please refer to the warranty card at the rear of this manual for information regarding your product’s parts and labour warranty, or visit us online at www.residentiagroup.com.au. At Residentia Group, we are customer obsessed and our Support Team are there to ensure you get the most out of your appliance.
User Manual: Page: 3 Contents: Page: Safety instructions 4 Your Esatto Cooktop 6 Installation Instructions 8 Cleaning & Maintenance 17 Technical Data 18 Purchase Details 19 Warranty Information 20 Notes 22
User Manual: Page: 4 Safety Instructions Your safety is of the utmost importance to. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Retailer where you purchased your unit from. The appliance should only be installed and connected by a suitably qualified and authorised person, strictly in accordance with the manufacturer’s instructions.
User Manual: Page: 5 DECLARATION OF CONFORMITY This appliance complies with the following European Directives: — 2006/95/CE General regulations / Low tension — 2009/142/CE Concerning gas appliances — 1935/2004/CE 90/128/EEC This appliance is suitable to come in contact with food — 2004/108/CE Electromagnetic compatibility — AS4551- Domestic gas cooking appliances — Low voltage – 73/23 — Safety standards – EN 60335-1, EN30-1-1, AS/NZS 3350-1,3350-2-6 The manufacturer declares that the cooktop is built u
User Manual: Page: 6 Your Esatto Cooktop SPECIFICATIONS Connection points diagram above: 1. Front of cooktop 2. Gas connection point 3. Electrical connection point.
User Manual: Page: 7 Your Esatto Cooktop (Continued) CONTROLS The following symbols will appear on the control panel, next to each control knob: ● Gas off Large flame: maximum setting → → → Burner indicator → Small flame: minimum setting The minimum setting is at the end of the anti-clockwise rotation of the control knob. All operation positions must be selected between the maximum and minimum position. Never select a knob position between the maximum and off position.
User Manual: Page: 8 Installation Instructions It’s important to carefully read the following installation instructions before beginning the installation of your cooktop. IMPORTANT! The installation must be carried out by a suitably qualified and authorised person, in accordance with the current version of the following: → AS/NZS5601.
User Manual: Page: 9 Installation Instructions (Continued) INSTALLING THE COOKTOP Cut a hole in your benchtop that corresponds with the relevant cut-out size for your Esatto Cooktop model. Refer to the “Your Esatto Cooktop” section of this user manual. IMPORTANT! You must have a gap of at least 30mm between the underside of the cooktop and any surface below. → Carefully turn the cooktop upside down and place it on a cushioned mat.
User Manual: Page: 10 Installation Instructions (Continued) IMPORTANT! This appliance must be installed by a licenced and authorised person and in compliance with the current standards. IMPORTANT! This hob is supplied to run on natural gas only and cannot be used on any other type of gas without modification. Refer to the LPG conversion section within this manual. → A regulator is required and supplied with the Cooktop for natural gas.
User Manual: Page: 11 Installation Instructions (Continued) GAS CONNECTION Install in accordance with relevant gas standards and/or codes of practice applicable. Connect the elbow fitting to the appliance gas manifold connection, and check that seals between the elbow and manifold connection are in place and in good condition. → For Natural gas: connect the natural gas appliance regulator (pictured below) with integral test point using approved gas thread tape or compound to the elbow fitting.
User Manual: Page: 12 Installation Instructions (Continued) CHECKING THE GAS SUPPLY 1 2 3 Check the manometer zero point is correct. Connect the manometer to the cooktop pressure point (located on the regulator). Turn on the gas supply and electricity and try to ignite the gas burner. Note: It will take additional time to light the gas for the first time as air needs to be purged from the pipes.
User Manual: Page: 13 Installation Instructions (Continued) GAS ADJUSTMENT (CONVERSION TO LPG) IMPORTANT! The conversion work must be carried out by a registered gas fitter and in accordance with the current standards. WARNING! Always isolate the cooktop from the electricity supply before changing the injectors and/ or adjusting the minimum flow of the burners. → Remove the pan-stands, burners and flame spreaders (A).
User Manual: Page: 14 Installation Instructions (Continued) MINIMUM FLOW ADJUSTMENT FOR COOKTOP GAS TAPS IMPORTANT! All work must be carried out by a registered gas fitter and in accordance with the current standards. WARNING! Always isolate the cooktop from the electricity and gas supply before changing the injectors and/or adjusting the minimum flow of the burners. → Switch the burner on and set the knob at the minimum position.
User Manual: Page: 15 Installation Instructions (Continued) GAS TAP MAINTENANCE IMPORTANT! The installation must be carried out by a suitably qualified and licensed gas fitter and in accordance with the current standards. WARNING! Before carrying out any maintenance operations, always isolate the cooktop from the electricity and gas supplies. If a gas tap becomes stiff to operate, then you should proceed as follows: → Remove the control knobs, pan supports, burners, hob fixing screws and clamps.
User Manual: Page: 16 Installation Instructions (Continued) The mains supply cable should be replaced in accordance with the following instructions and by suitably qualified and authorised person: → Switch the appliance off at your mains supply. → Open the box of the supply board. → Unscrew the clamp fixing the cable. → Replace the cable with one of the same length and in accordance with the specification given above. → The “green-yellow” earth wire must be connected to the terminal marked .
User Manual: Page: 17 Cleaning & Maintenance By ensuring proper cleaning and maintenance of your Esatto cooktop, you can ensure that it will have a long and fault free operation. WARNING! Do not start cleaning the cooktop until it has completely cooled. → Typically you should only ever need to clean your cooktop with warm soapy water, or light cleaning products to assist with the removal of fat or oil emulsions (such as general cleaning sprays). → Your cooktop should be cleaned after every use.
User Manual: Page: 18 Technical Data ELECTRICAL DETAILS : Rated Voltage: Supply Connection: Max Rated Inputs: Mains Supply Lead: 220 - 240 Vac 50 / 60 Hz 3A 0.8 W 3 core × 0.75mm² (Type RR-F marked) GAS TYPE & OPERATING PRESSURE: Connection: Type: Rp ½ (ISO R7) Natural Gas (1.0 KPa) ULPG (2.
User Manual: Page: 19 Purchase Details For future reference, please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. The rating plate of your hob is located on the underneath of the appliance. Therefore please fit the duplicate data plates or label on the outside of the cupboard to sure that the label can be easily seen during operation.
User Manual: Page: 20 Warranty WARRANTY TERMS AND CONDITIONS COOKING APPLIANCES → This document sets out the terms and conditions of the product warranties for Residentia Group Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
User Manual: Page: 21 Warranty continued 7. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship.
User Manual: Notes Page: 22
User Manual: Page: 23
User Model Manual: Code/s: ECG6 Page: 24
