Product: 70cm Electric Cooktop Model Code/s: 7 B User Manual Exactly what you need Online: esatto.
User Manual Residentia Group — Head Office. 118 Campbell Street Collingwood, VIC Australia 3066 — ACN. 600 546 656 — Online. residentia.group 02 Congratulations on purchasing your new electric cooktop. The Esatto brand is proudly distributed within Australia by Residentia Group Pty Ltd. Please refer to the warranty card at the rear of this manual for information regarding your product’s parts and labour warranty, or visit us online at www.residentia.
03 esatto.
User Manual 04 Safety Instructions This cooktop must only be installed by a suitably qualified and licenced person and in accordance with the instructions provided. Incorrect installation may cause harm to persons, damage property and void the product’s warranty. IMPORTANT! The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85°C above the ambient temperature of the room it is located in, whilst in use.
05 esatto.house DECLARATION OF CONFORMITY The manufacturer declares that the cooktop is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force. This appliance must be used by a trained person for domestic purposes only. UNPACKING During transportation, protective packaging was used to protect the appliance against any damage.
USER MANUAL User Manual PAGE 06 INALTO COOKTOP Your YOUREsatto Cooktop SPECIFICATIONS 700 55 490 560 MODEL ECC704TB PR 700mm × 520mm × 55mm MODEL ECC704TB 2 × 1.80 kW radiant zones (Ø 190mm) BURNERS 2 × 1.20 kW radiant zones (Ø 155mm) CERAMIC COOKTOP SURFACE LAYOUT 1 4 2 3 TOUCH CONTROLS 1 2 3 4 1.20kW zone (Ø 155mm) 1.80kW zone (Ø 190mm) 1.20kW zone (Ø 155mm) 1.
07 PAGE 07 esatto.house INSTRUCTIONS Installation INSTALLATION Instructions It’s important to carefully read the following installation instructions before beginning the installation of your cooktop.
USER MANUAL User Manual PAGE 08 INSTALLATION INSTRUCTIONS LOCATING THE FIxING BRACKETS The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob. Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation. Adjust the bracket position to suit for different work surface’s thickness. CAUTIONS! ► The ceramic cooker hob must be installed by qualified personnel or technicians.
09 PAGE 09 esatto.house CONNECTING THE HOB TO THE MAINS POWER SUPPLY ► The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown below. ► If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents.
USER MANUAL User Manual PAGE 10 YOUR COOKTOP Operating OPERATING Your Cooktop BEFORE FIRST USE IMPORTANT! ► ► ► You should clean the ceramic cooktop surface (refer to the “Cleaning and Maintenance” section). You should switch on one cooking zone at a time, for 5 minutes at the maximum setting. This will help to eliminate any new smell that exists and evaporate any humidity that has formed on the heating elements during transit. Do not burn off more than one zone at once.
PAGE 1 1 esatto.house OPERATING YOUR COOKTOP CHOOSING THE RIGHT COOKWARE Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone. Always lift pans off the ceramic hob – do not slide, or they may scratch the glass. USING THE TOUCH CONTROLS ► The controls respond to touch, so you don’t need to apply any pressure.
USER MANUAL User Manual TO START COOKING Do not use cookware with jagged edges or a curved base. ► After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the ceramic hob has entered the state of standby mode. 1. Touch the ON/OFF control. all the indicators show “-“. 2. Place a suitable pan on the cooking zone that you wish to use. ► Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. 3.
PAGE 13 esatto.house RESIDUAL HEAT INDICATORS ► ► ► ► After a zone is switched off, the corresponding cooking zone will show an “H” in the control panel. This means that the temperature of the zone still high enough to cause injury. The residual heat indicator will go out when the surface has cooled down to a safe temperature. The residual heat also can be used as an energy saving function if you want to heat further pans,use the hotplate that is still hot.
USER MANUAL User Manual OPERATING YOUR COOKTOP USING THE TIMER You can use the timer in two different ways: ► You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up. ► You can set it to turn one or more cooking zones off after the set time is up. ► You can set the timer up to 99 minutes. USING THE TIMER AS A MINUTE MINDER If you are not selecting any cooking zone ► Make sure the cooktop is turned on.
PAGE 15 esatto.house SETTING THE TIMER TO TURN ONE OR MORE COOKING ZONES OFF If the timer is set on one zone: ► Touch the”-“ or ”+” of the corresponding cooking zone that you want to set the timer for. . ► Set the time by touching the “-“ or “+” control of the timer. ► Touch the “-“ or “+” control of the timer once will decrease or increase by 1 minute. ► Touch and hold the ”-“ or “+”control of the timer will decrease or increase by 10 minutes.
USER MANUAL User Manual PAGE 16 16 If the timer is set on more than one zone: ► When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes. (set to 15 minutes) ► (set to 45 minutes) Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new min. timer and the dot of corresponding zone will flash.
esatto.house Cleaning & Maintenance By ensuring proper cleaning and maintenance of your Esatto cooktop, you can ensure that it will have a long and fault free operation. WARNING! Do not start cleaning the cooktop until it has completely cooled. CLEANING YOUR CERAMIC COOKTOP ► Any residues that are left on the cooktop surface from cleaning agents will damage it. You should remove any residues with warm water mixed with a little washing up liquid.
User Manual 18 Troubleshooting Please read the issues below carefully and try all relevant steps. If none of this helps, please contact us on 1300 11 4357 for further advice or to schedule a technician to inspect your cooktop. Tips & Hints THE COOKING ZONES ARE NOT FUNCTIONING THE RESIDUAL HEAT INDICATOR DOES NOT APPEAR THE COOKTOP IS HUMMING WHEN A ZONE IS SELECTED Please check... That your cooktop is plugged in and there is power to the wall socket.
esatto.house Purchase Details For future reference, please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. The rating plate of your cooktop is located on the underneath of the appliance. Therefore please fit the duplicate data plates or label on the outside of the cupboard to sure that the label can be easily seen during operation.
User Manual 20 Warranty Information WARRANTY TERMS & CONDITIONS COOKING APPLIANCES (BUILT-IN OVENS, COOKTOPS) This document sets out the terms and conditions of the product warranties for Residentia Group Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
5. (a) (b) esatto.house You will bear the cost of transportation, travel and delivery of the Appliance to and from Residentia Group or its ASR.
User Manual This page is intentionally left blank 22
This page is intentionally left blank esatto.
Appliances Exactly what you need W W W. R E S I D E N T I A .
