Product Features： Extra thick LED light Touch switch with memory Touch switch dim function Anti-fog pad LED Mirror Series： Size： Series： Size： REJSBM2432VCSKXXX W600XH800MM AB-C-C24-U-001 DIA600MM AB-C-4024R-U-001 W1000XH600MM For easy and safe installation, please refer to the following: Read all instructions thoroughly before installing the enclosed product. Read and take note of all safety, care and maintenance information.
WARNING AND SAFETY INSTRUCTIONS Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use. WARNING Risk of Fire and Electric Shock ●All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
PRODUCT DESCRIPTION CHECK PRODUCT LIST AFTER OPENING THE PACKAGE ●LED Lighted Mirror ●Installation Manual ●Z-bar - -1pcs - -1pcs - -1pcs - -4pcs（One as a spare part） ●REJSBM2432VCSKXXX-Wall Mounting Screws - -4pcs（One as a spare part） ●REJSBM2432VCSKXXX-Drywall Anchor - -5pcs（One as a spare part） - -5pcs（One as a spare part） ●AB-C-4024R-U-001-Wall Mounting Screws ●AB-C-4024R-U-001-Drywall Anchor （TOOLS YOU MAY NEED） Series： Size： REJSBM2432VCSKXXX W600XH800MM B-C-4024R-U-001 W1000XH600MM * All diagr
PRODUCT DESCRIPTION & INFORMATION Model：REJSBM2432VCSKXXX Model：AB-C-4024R-U-001
INSTALLATION PROCESS X4 X1 X4 (According to actual needs) (According to actual needs) Warning: Always switch off the electrical supply at the mains during installation and maintenance. Do not switch on the electrical supply at the mains until the end of the installation. (Z-bar) Step 1: Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it's installed on drywall, concrete or tile surface).
PRODUCT DESCRIPTION CHECK PRODUCT LIST AFTER OPENING THE PACKAGE ●LED Lighted Mirror ●Installation Manual ●Z-bar ●AB-C-C24-U-001-Wall Mounting Screws ●AB-C-C24-U-001-Drywall Anchor （TOOLS YOU MAY NEED） Series： Size： AB-C-C24-U-001 DIA 600MM - -1pcs - -1pcs - -1pcs - -4pcs（One as a spare part） - -4pcs（One as a spare part）
PRODUCT DESCRIPTION & INFORMATION Model：AB-C-C24-U-001 * All diagrams are for reference only. All model dimensions and proportions position will vary.
INSTALLATION PROCESS X4 X4 X1 (According to actual needs) (According to actual needs) Warning: Always switch off the electrical supply at the mains during installation and maintenance. Do not switch on the electrical supply at the mains until the end of the installation. (Z-bar) Step 1: Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it's installed on drywall, concrete or tile surface).
OPERATION PROCESS Series： AB-C-4024R-U-001 AB-C-C24-U-001 Connect the power supply and touch the switch once to turn on the light. When the light is on, the anti-fog function is activated Automatically. Adjust the brightness of the light by long press the same switch. * All diagrams are for reference only. All model dimensions and proportions position will vary.
OPERATION PROCESS Button 1: First short press , anti-fog function works . Second short press , anti-fog function stops . The two operations loop in turn . Button 2: Short press (< 1 second) the LED light switch button to turn on / off the LED lamp. Long press (> 1 second) the button to adjust the brightness. When the LED is on, long press the button to activate dimming. The LED brightness changes in loop from 100% to 5%, or from 5% to 100% on second press.
LED Mirror Power Source FAQ Scenario 1 (Wall Switch) By doing so, the mirror is now bridged to the wall switch. In order to turn on the mirror, the wall switch needs to be on. The touch switch can be used to turn on the LED mirror and anti-fog pad. The mirror shuts down once the wall switch is flipped to OFF. Scenario 2 (Wall Dimmer Switch – Not Accepted) This is a scenario that is not acceptable. There is no work around for our mirror. Do not try this way as it will damage the LED driver.
