User guide

Using your Sony Ericsson T68/T68i/T610/T616/Z600 with the Logitech wireless hub

Synchronizing your Sony Ericsson T68/T68i/T610/T616/Z600

and your computer

To synchronize the contact details on your mobile phone and your computer:

1. Make sure that your mobile phone is paired to your computer. See the

section Connecting your Sony Ericsson T68/T68i/T610/T616/Z600

, page 6.

2. Right-click the Bluetooth



icon,

in the Windows



Taskbar.

3. Select Quick Connect Æ PIM Synchronization Æ Phone Name.

Please note:

• The first time you synchronize, it may take about ten to fifteen

minutes - subsequent synchronizations are much quicker.

• If your mobile phone is not shown in this menu, then it is not

currently discovered or paired with your computer. To pair the two

devices, see Connecting your Sony Ericsson

T68/T68i/T610/T616/Z600

, page 6.

• You can also start synchronization from your Entire Bluetooth

Neighborhood by right-clicking the device icon and selecting Start

IrMC Synchronization.

• If your mobile phone is not currently paired but it is in discoverable

mode, you are prompted to pair it - see Pairing your Sony Ericsson

T68/T68i/T610/T616/Z600 on request

, page 33.

• During synchronization the mobile phone is locked so that you

cannot make telephone calls with it.

The synchronization starts and a progress bar is displayed.

When the synchronization is complete, a confirmation message dialog is

displayed:

4. Click OK to close the dialog.

If you have problems synchronizing, see Troubleshooting

, page 36 for

suggestions of the actions you should take.