Operation Guide
Table Of Contents
- Copyright Information
- Disclaimer
- Contents
- Diagram Index
- Table Index
- Notice
- User Service
- 1 Introduction
- 2 Interface and Component
- 3 Functions and Operation Instruction
- 3.1 Startup & Shutdown Button
- 3.2 Left and Right Buttons
- 3.3 Up and Down Buttons
- 3.4 Data Transmitting-receiving Indicator Light
- 3.5 3G/4G and Bluetooth Operating Condition
- 3.6 Instruction of Radio Startup and Power Indicator Light Conditions
- 3.7 Device Menu
- 3.7.1 Device Information
- 3.7.1 Device Information
- 3.7.2 Transmitting/Receiving Channel and Frequency
- 3.7.3 Data Protocol
- 3.7.4 RF Baud Rate
- 3.7.5 Transmitting/Receiving Mode
- 3.7.6 Transmitting Power
- 3.7.7 Serial Port Baud Rate
- 3.7.8 Serial Port Baud Rate Self-adaption
- 3.7.9 OLED Sleep Mode
- 3.7.10 Interference Detection
- 3.7.11 Language
- 3.7.11 Language
- 3.8 Use of Radio Configuration Software
- 3.9 Firmware Upgrade
- Appendix A Technical Indexes
- Appendix B Command
- Appendix C eRadio SIM Setup
- Appendix C eRadio SIM Setup
- Appendix D eRadio FAQ
2.4 Bluetooth Module
If the current radio supports Bluetooth, users can configure and query the radio
parameters by the means of Bluetooth, Bluetooth V5.0 is supported;
2.5 Network Module
If the current radio supports network data transmission, users can transmit
their data via network, now radio can be used as CORS station, without the
need of RTK device, thus saving cost and simplifying outdoor operation. In
addition, network module supports 3G/4G.