User Guide

ManualsBrandsEpson ManualsInkjet PrinterEPSON XP-5200 Wireless Color Inkjet All In One Printer

4 Remove only the yellow tape from each ink cartridge.

Caution: Do not remove any other labels or seals, or ink will

leak. Do not touch the areas shown here.

5 Insert the cartridge in the holder for each color. Press

each cartridge down until it clicks. Make sure all

cartridges are pushed down into place.

6 Lower the scanner unit.

Note: Continue to lower the scanner unit even if you feel some

resistance.

7 Press OK. The printer starts charging the ink. Ink

charging takes approximately 5 minutes. When you see

a completion message on the printer’s LCD screen,

charging is complete.

Caution: Don’t turn o the printer or raise the scanner unit while

it is charging or you’ll waste ink.

Note: As part of setup, your product’s serial number will be

sent to a secure Epson server so that you can be eligible to

participate in programs we may oer from time to time, including

the Epson ink replenishment program. You will have a separate

opportunity to consent to participating in such programs.

8 Follow the on-screen instructions to adjust the print

quality of your product.

Note:

• You need to load 4 sheets of letter-size paper before you can

adjust the print quality. See “Load paper” on this sheet for

details.

• Select Adjust Later if you want to adjust the print quality later.

For more information, see the online User’s Guide.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online

User’s Guide.

Note: This printer is designed for use with Epson

cartridges only, not

third-party cartridges or ink. For important ink information, visit

http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink

(Canada) or see your printer box.

Unpack

Note: Do not open ink cartridge packages until you are ready to install

the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all protective materials from the product and lift

up the scanner unit until it locks into place.

2 Remove all protective materials from inside the product.

Caution: Do not touch the at white cable.

3 Lower the scanner unit.

Note: Continue to lower the scanner unit even if you feel some

resistance.

4 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

Choose a setup method

The Epson Smart Panel

app can help you set up your printer

through an interactive, step-by-step process using your

smartphone or tablet.

If you do not want to use

a mobile device for setup,

skip to the “Turn on and

congure” section.

To use your mobile device

for setup, continue to

step 1.

1 Download the Epson Smart Panel app

from your device’s app store. Do not

launch the app yet.

2 Hold the power button until it lights up to turn on the

product.

Note: Do not connect your product to your computer yet.

3 Launch the app and follow its instructions to set up your

product. If necessary, tap the + icon on the top right

corner of the app’s home screen, tap Start setting up,

and follow the instructions to set up your product.

For information on connecting your product to a computer,

using voice-activated printing, or solving problems, or for

details on reaching Epson support, see the sections on the

back of this sheet.

Turn on and configure

1 Raise up the control panel, turn on the product and wait

for the power light to turn on.

Note: If an error code appears, turn o the product and check

that no protective material has been left inside the product.

2 Press or to select your language, then press OK.

Note: You can change the language later using the product’s

control panel. For more information, see the online User’s Guide.

3 When you see the Epson Smart Panel setup screen, select

Continue setup without the app and press OK.

Install ink cartridges

Caution: Keep ink cartridges out of the reach of children and do not

drink the ink.

Note: The included initial cartridges are designed for reliable printer

setup and cannot be used as replacement cartridges or resold. After

setup, the remaining ink is available for printing.

1 Lift up the scanner unit until it locks into place.

2 Gently shake the black ink cartridge.

Caution: Do not shake the other ink cartridges.

3 Unpack the ink cartridges.

Start Here

XP-5200

Summary of content (2 pages)

PAGE 1
3 XP-5200 Lower the scanner unit. 3 Start Here 1 Turn on and configure 4 Remove only the yellow tape from each ink cartridge. Raise up the control panel, turn on the product and wait for the power light to turn on. IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide. Caution: Do not remove any other labels or seals, or ink will leak. Do not touch the areas shown here.
PAGE 2
5 Load paper See the online User’s Guide for information about loading capacity, available paper types and sizes, and loading envelopes. 1 Make sure the product is done charging the ink, then pull out the paper cassette. 6 Install software Note: • An Internet connection is required to obtain the product software. • To print from a Chromebook™, go to http://epson.com/support/chromebookprint (U.S.) or http://epson.ca/support/chromebookprint (Canada) for instructions.