WF-3540 User's Guide
Contents WF-3540 User's Guide............................................................................................................................... 13 Product Basics .......................................................................................................................................... Setting Up the Control Panel .............................................................................................................. Control Panel Buttons and Lights .........................
Loading Paper for Photos in the Cassette .......................................................................................... Loading Envelopes in the Cassette .................................................................................................... Loading Paper and Envelopes in the Rear Feed Slot ........................................................................ Paper Loading Capacity ...................................................................................................
Changing the Language of the Printer Software Screens ......................................................... 85 Changing Automatic Update Options ............................................................................................ 86 Printing with Mac OS X....................................................................................................................... 87 Selecting Basic Print Settings - Mac OS X ................................................................................
Selecting a Scan Area - Home Mode ...................................................................................... Available Image Adjustments - Home Mode ........................................................................... Selecting a Scan Size - Home Mode....................................................................................... Scanning in Professional Mode ...................................................................................................
Fax Receive Options............................................................................................................... Fax Communications Options................................................................................................. Fax Report Options................................................................................................................. Restore Default Settings Options............................................................................................
Printing from a Memory Card ........................................................................................................... 206 Viewing and Printing Photos........................................................................................................ 207 Viewing and Printing Individual Photos ................................................................................... 207 Printing All Photos..........................................................................................
Purchase Epson Ink Cartridges and Maintenance Box .................................................................... Ink Cartridge and Maintenance Box Part Numbers...................................................................... Removing and Installing Ink Cartridges............................................................................................ Printing With Black Ink and Expended Color Cartridges...................................................................
Network Software Cannot Find Product on a Network................................................................. Product Does Not Appear in Mac OS X Printer Window .............................................................. Cannot Print Over a Network....................................................................................................... Cannot Scan Over a Network ......................................................................................................
Grainy Printout............................................................................................................................. 303 Incorrect Colors ........................................................................................................................... 304 Solving Scanning Problems ............................................................................................................. 305 Scanning Software Does Not Operate Correctly .....................................
Scanning Specifications ................................................................................................................... Automatic Document Feeder (ADF) Specifications .......................................................................... Fax Specifications ............................................................................................................................ Paper Specifications .....................................................................................
WF-3540 User's Guide Welcome to the WF-3540 User's Guide.
Product Basics See these sections to learn about the basic features of your product. Setting Up the Control Panel Product Parts Locations Scanning, Printing, Copying, and Faxing from the Touch Panel Using Eco Mode Epson Connect Solutions for Smartphones, Tablets, and More Using AirPrint Using Google Cloud Print Setting Up the Control Panel See these sections to set up the control panel for use.
3 The 4 The 5 The LCD screen 6 The arrow buttons 7 The B&W button 8 The Color button 9 The Stop/Reset button home button back button Parent topic: Setting Up the Control Panel Changing LCD Screen Language You can change the language used on the LCD screen. 1. Press the home button, if necessary. 2. Press the arrow buttons and select Setup. 3. Select Printer Setup. 4. Press the down arrow button and select Language. 5. Select a language. 6. Press the home button to exit.
5. Select one of these Sound options, then select Off to turn off the sound: • Button Press • Error Notification • Completion Notice 6. To adjust the sound volume, select Volume, then select High, Middle, or Low. 7. Press the home button to exit. Parent topic: Setting Up the Control Panel Product Parts Locations See these sections to identify the parts on your product.
1 ADF cover 2 Automatic Document Feeder (ADF) 3 Edge guide 4 ADF input tray 5 ADF output tray 6 Paper cassette 1 7 Paper cassette 2 1 Document cover 2 Scanner glass 3 Control panel 4 Memory card slot 5 Memory card light 17
6 USB Type A port for external devices Parent topic: Product Parts Locations Product Parts - Paper Path 1 Edge guides 2 Rear paper feed slot 3 Output tray 4 Output tray extension 5 Paper stopper 6 Edge guides 7 Paper cassette Parent topic: Product Parts Locations 18
Product Parts - Inside 1 Scanner unit 2 Cartridge cover 3 Cartridge holder 4 Print head (do not remove) Parent topic: Product Parts Locations 19
Product Parts - Back 1 Maintenance box 2 Duplexer (rear cover) 3 AC inlet 4 LINE port 5 EXT port 6 LAN port 7 USB port Parent topic: Product Parts Locations Scanning, Printing, Copying, and Faxing from the Touch Panel You can scan, print, copy, and fax right from your product's touch panel. • Use the touch panel to quickly scan a photo or document and save it on your computer or on a memory card. You can even scan and send the file to an online service or to a remote printer.
• You can insert the memory card from your digital camera, connect the camera directly to your product, or insert a thumb drive containing photos. Use the touch panel to select the photos you want, then print them in a variety of layouts. • Your product works like a copy machine too. You can place a photo or document on the scanner glass, or load up to 30 pages in the automatic document feeder (ADF). • For faxing, you first need to connect a phone line as described on the Start Here sheet.
4. Select the time period you want. 5. Press the home button to exit. Parent topic: Using Eco Mode Changing the Sleep Timer Setting - Windows You can use the printer software to change the time period before the printer enters sleep mode. 1. Do one of the following: • Windows 8.x: Navigate to the Apps screen and select Control Panel. Select View Devices and Printers, right-click your product name, and select Printing Preferences. • Windows 7: Click and select Devices and Printers.
4. Select the time period you want as the Sleep Timer setting and click Send. 5. Click OK to close the open program windows. Parent topic: Using Eco Mode Changing the Sleep Timer Setting - Mac OS X You can use the printer software to change the time period before the printer enters sleep mode. 1. Do one of the following: • Mac OS X 10.6/10.7/10.8: In the Apple menu or the Dock, select System Preferences. Select Print & Fax or Print & Scan, select your product, and select Options & Supplies.
3. Select the time period you want as the Sleep Timer setting. 4. Click Apply. 5. When you see the confirmation message, click Yes, then close the Printer Settings window. Parent topic: Using Eco Mode Selecting Other Eco Settings From the Touch Panel You can use the product's touch panel to select 2-sided copying, or see a reminder that the Preview feature will save paper and ink. Note: If you turn on 2-sided printing, 2-sided copying will be selected by default. 1. Press the home button if necessary. 2.
Epson Connect Solutions for Smartphones, Tablets, and More You can print documents, photos, emails, and web pages from your home, office, or even across the globe. You can use your smartphone, tablet, or computer.
3. Download Epson iPrint from the Apple App Store or Google Play. 4. Connect your mobile device to the same wireless network that your product is using. 5. Print from your mobile device to your Epson product. Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More Using Epson Remote Print With Epson Remote Print software on your Windows computer or laptop, you can print to an Epson Email-enabled product anywhere in the world. 1.
Using AirPrint AirPrint allows you to wirelessly print to your AirPrint-enabled product from iPhone, iPad, and iPod touch running the latest version of iOS. 1. Set up your product for wireless printing as described in this manual. See the link below. 2. Connect your Apple device to the same wireless network that your product is using. 3. Print from your iPad, iPhone, or iPod touch to your product.
9. Enter your Google Account username and password and click Sign in, or, if you don't have an account, click Sign up for a new Google Account and follow the on-screen instructions. 10. Click Finish printer registration to complete setup and print a test page. Your product is now linked to your Google Account and can be accessed from any Chromebook, computer, Apple or Android device with internet access.
Wi-Fi Networking See these sections to use your product on a Wi-Fi network. Selecting Wireless Network Settings From the Touch Panel Enabling Wi-Fi Direct Mode Disabling and Re-enabling Wi-Fi Features Selecting Wireless Network Settings From the Touch Panel You can select or change wireless network settings using your product touch panel. To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software from the product CD.
3. Select Wi-Fi Setup Wizard. Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on the Start Here sheet to set up your product on a wired network and install the necessary software from the product CD. The installer program guides you through network setup. 4. Select the name of your wireless network or enter the name manually.
7. Confirm the displayed network settings and press Proceed to save them. Note: If you need to change a setting, press the back button. 8. If you want to print a network setup report, press one of the Stop/Reset button.) 9. Press the buttons. (Otherwise, press the home button to exit. The WiFi light should now be on, but not flashing. Note: If the WiFi light is off, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
3. Scroll down and select Wi-Fi Direct Connection Setup . 4. Select Proceed. 5. When you see a message asking you to select the Wi-Fi Network, scroll down to view the SSID (WiFi network name) and password. 6. Select Change Password and select Proceed. Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password. 7. Enter a Wi-Fi Direct password. Note: The password must be at least 8 and no more than 22 characters long.
• Press the touch screen buttons repeatedly to scroll through characters. • Press or to move the cursor. • Press 1 Symb. to enter symbols. • Press to delete the previous character. 8. Press Done when you finish entering your password. 9. Scroll down to view the SSID (Wi-Fi network name) and password. 10. Select Proceed. 11. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown. 12. Press the home button to exit.
Disabling and Re-enabling Wi-Fi Features You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection. Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and password, and any network settings selected for the Epson Connect services you may use. 1. Press the home button, if necessary. 2. Select Wi-Fi Setup. You see this screen: 3. Scroll down and select Disable Wi-Fi. 4.
Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for Documents in the Cassette Loading Paper for Photos in the Cassette Loading Envelopes in the Cassette Loading Paper and Envelopes in the Rear Feed Slot Paper Loading Capacity Available Epson Papers Borderless Paper Type Compatibility Paper or Media Type Settings Loading Paper for Documents in the Cassette You can print documents on a variety of paper types and sizes.
2. Pull out the paper cassette. 3. Slide the edge guides outward. Note: If you are using legal-size paper or larger, squeeze the tab and extend the paper cassette.
4. Slide the edge guide to your paper size.
5. Load a stack of paper, printable side down, against the edge guide as shown. Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette. 6. Slide the edge guides against the paper, but not too tightly. Note: Make sure the paper fits beneath the top edges of the guides. Caution: To prevent paper feeding problems, make sure you do not load too much paper in the cassette.
7. Gently insert the paper cassette. Note: The paper may slide forward slightly as you insert the cassette. This is normal. 8. Extend the output tray and open the paper stopper.
Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or insert the paper cassette during printing. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load the printable side facedown. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guide.
1. Close the paper stopper and output tray, if necessary. 2. Pull out the paper cassette.
3. Slide the edge guides outward. 4. Slide the edge guide to your paper size.
5. Load photo paper, printable side down, against the edge guide as shown. Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette. 6. Slide the edge guides against the paper, but not too tightly. Note: Make sure the paper fits beneath the top edges of the guides. Caution: To prevent paper feeding problems, make sure you do not load too much paper in the cassette.
7. Gently insert the paper cassette. Note: The paper may slide forward slightly as you insert the cassette. This is normal. 8. Extend the output tray and open the paper stopper.
Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or insert the paper cassette during printing. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load the printable side facedown. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions.
2. Pull out the paper cassette. 3. Slide the edge guides outward.
4. Load envelopes printable side down and flap edge right as shown. 5. Slide the edge guides against the envelopes, but not too tightly.
Note: Make sure the envelopes are loaded against the edge guide and not sticking out from the end of the cassette. Caution: To prevent paper feeding problems, make sure you do not load too many envelopes in the cassette. 6. Gently insert the paper cassette. Note: The envelopes may slide forward slightly as you insert the cassette. This is normal.
7. Extend the output tray and open the paper stopper. Always follow these paper loading guidelines: • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time. • If print quality declines when printing multiple envelopes, try loading one envelope at a time. • Do not load envelopes that are curled, folded, or too thin.
• A4 (8.3 × 11.7 inches [210 × 297 mm]) • Legal (8.5 × 14 inches [216 × 357 mm]) 1. Extend the output tray and open the paper stopper. Note: If you are using legal-size or longer paper, do not open the paper stopper. 2. Open the rear paper feed slot and push it back.
3. Hold one sheet of paper with the printable side faceup and slide the edge guides against the paper, but not too tightly. Note: Load envelopes short edge first, with the flap facing down and to the right.
4. Insert the paper or envelope into the slot until the printer feeds it automatically. Always follow these paper loading guidelines: • Load only one sheet or one envelope at a time. • Load paper short edge first, no matter which way your document faces. • Load the printable side faceup. • Load letterhead or pre-printed paper top edge first. • Check the paper package for any additional loading instructions.
Paper Loading Capacity You can load one envelope or one sheet of paper in these sizes in the rear feed slot: • No. 10 (4.1 × 9.5 inches [105 × 241 mm]) envelope • Letter (8.5 × 11 inches [216 × 279 mm]) • A4 (8.3 × 11.7 inches [210 × 297 mm]) • Legal (8.5 × 14 inches [216 × 357 mm]) You can load paper of these types in the paper cassette(s): Paper type Loading capacity per paper size Paper cassette Lower paper cassette (if available) Plain paper , Letter (8.
Available Epson Papers You can purchase genuine Epson ink and paper at Epson Supplies Central at epson.com/ink3 (U.S. sales) or epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766). Note: Paper/media availability varies by country. Paper Type Size Part number Sheet count Epson Bright White Paper Letter (8.
Paper Type Size Part number Sheet count Epson Premium Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041808 40 S041727 100 5 × 7 inches (127 × 178 mm) S041464 20 8 × 10 inches (203 × 254 mm) S041465 20 Letter (8.5 × 11 inches [216 × 279 mm]) S042183 25 S041667 50 Epson Ultra Premium Photo Paper 4 × 6 inches (102 × 152 mm) Glossy S042181 60 S042174 100 5 × 7 inches (127 × 178 mm) S041945 20 8 × 10 inches (203 × 254 mm) S041946 20 Letter (8.
• Epson Premium Presentation Paper Matte Double-sided • Epson Ultra Premium Photo Paper Glossy • Epson Premium Photo Paper Semi-gloss • Epson Premium Photo Paper Glossy • Epson Photo Paper Glossy Borderless Paper Sizes • 4 × 6 inches (102 × 152 mm) • 5 × 7 inches (127 × 178 mm) • 8 × 10 inches (203 × 254 mm) • Letter (8.5 × 11 inches [216 × 279 mm]) • 16:9 wide (4 × 7.1 inches [102 × 181 mm]) • A4 (8.3 × 11.
For this paper: Select this paper Type or Media Type setting: Epson Premium Presentation Paper Matte Premium Presentation Paper Matte Epson Premium Presentation Paper Matte Doublesided Epson Brochure & Flyer Paper Matte Double-sided Epson Ultra Premium Presentation Paper Matte Envelopes Envelope Parent topic: Loading Paper 57
Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals in the Automatic Document Feeder Placing Originals on the Scanner Glass You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 1.
Related topics Copying Scanning Faxing Placing Originals in the Automatic Document Feeder You can place multi-page original documents in the Automatic Document Feeder (ADF). Make sure the originals meet the Automatic Document Feeder specifications before loading them. Caution: Make sure your originals are not creased or folded, and do not contain holes, staples, tape, or other materials that could obstruct the feeder. 1. Slide the ADF edge guide outward. 2.
3. Insert the originals into the ADF faceup and top-edge first. 4. Slide the ADF edge guide against the originals, but not too tightly.
Parent topic: Placing Originals on the Product Related references Automatic Document Feeder (ADF) Specifications Related topics Copying Scanning Faxing 61
Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents Copying and Restoring Photos Copying ID Cards Paper Type Settings - Copying Paper Size Settings - Copying Copying Options Copying Documents You can copy documents onto plain paper or Epson special papers. Note: 2-Sided Copying may be selected by default, but you can change this setting if necessary. 1.
5. To print more than one copy, press + or – to select the number (up to 99). 6. To see how your copy will look, select Preview. 7. If you need to adjust the darkness of your copy, press the left or right arrow buttons to change the Density setting. 8. Scroll down to view and change additional settings if necessary. 9. When you are ready to copy, press one of the Note: To cancel printing, select Cancel.
Copying and Restoring Photos You can copy photos and restore the colors if necessary. 1. Load photo paper in the product. 2. Press the home button, if necessary. 3. Select More Functions. 4. Select Copy/Restore Photos. 5. Select On or Off.
6. Place up to two original photos on the product, positioned as shown. 7. Press one of the buttons. Your photo or photos are scanned and previewed. 8. Press + to select the number of copies you want (up to 99). 9. If you placed two originals on the scanner, press the left or right arrow to view the second original, then press + to select the number of copies. 10.
4. Select ID Card Copy. 5. To print more than one copy, press + to select the number (up to 99). 6. Scroll down to select the size and source of the paper you loaded. 7. Press one of the buttons. You see instructions on the LCD screen. Scroll down to see how to place your card. 8. Place your ID card on the product facedown, positioned as shown. 9. When you are ready to print, press one of the buttons. 10.
Placing Originals on the Product Paper Type Settings - Copying Select a setting that matches the paper you loaded.
• Legal (8.5 × 14 inches [216 × 357 mm]) • A4 (8.3 × 11.7 inches [210 × 297 mm]) Parent topic: Copying Copying Options Select the copying options you want to use for your copies. Note: Not all options or settings may be available, depending on other copying settings.
Copying option Available settings Description Paper Type Plain Paper Adjusts printer settings for the selected paper type Matte Prem.
Parent topic: Copying 70
Printing From a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select Enable automatic checking and click OK. The update scans your system to see if you have the latest product software. Follow the on-screen instructions.
3. If necessary, select your product name as the printer you want to use. Note: You may also need to select Properties or Preferences to view your print settings. You see the Main tab of your printer settings window: 4. For the Paper Source setting, select where you loaded the paper you want to print on. 5. Select the size of the paper you loaded as the Document Size setting.
6. If you are printing a borderless photo, select Borderless. You can click Settings to access additional options for borderless printing. Note: You must select a compatible borderless paper type and size to print without borders. Check the borderless paper compatibility list for details. 7. Select the orientation of your document. Note: If you are printing an envelope, select Landscape. 8. Select the type of paper you loaded as the Paper Type setting.
Related references Paper or Media Type Settings Borderless Paper Type Compatibility Related tasks Printing Your Document or Photo - Windows Selecting Double-sided Printing Settings - Windows Paper Source Options - Windows You can select any of the available options in the Paper Source menu to print on the paper loaded in that source. Cassette 1 Selects the paper in cassette 1 as the paper source. Cassette 2 Selects the paper in cassette 2 as the paper source.
Multi-Page Printing Options - Windows You can select any of the available options in the Multi-Page menu to set up your multi-page print job. 2-Up and 4-Up Prints 2 or 4 pages on one sheet of paper. Click the Page Order button to select page layout and border options. 2×1 Poster, 2×2 Poster, 3×3 Poster, 4×4 Poster Prints one image on multiple sheets of paper to create a larger poster. Click the Settings button to select image layout and guideline options.
4. Select the double-sided printing options you want to use. 5. Click OK to return to the Main tab. 6. Click the Print Density button.
7. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 8. If necessary, select the Adjustments options you want to use. 9. Click OK to return to the Main tab. 10. Print a test copy of your double-sided document to test the selected settings. 11. Follow any instructions displayed on the screen during printing.
Binding Margin Options Select options that define a wider margin to allow for binding. Create Folded Booklet Options Select the Booklet checkbox and a binding option to print double-sided pages as a booklet. Parent topic: Selecting Double-sided Printing Settings - Windows Print Density Adjustments - Windows You can select any of the available options on the Print Density Adjustment window to adjust the print quality of your double-sided print job.
1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options: • Select the Fit to Page option to size your image to fit the paper you loaded. Select the size of the your document or photo as the Document Size setting, and the size of your paper as the Output Paper setting. • Select the Zoom to option to reduce or enlarge your document or photo by a specific percentage. Select the percentage in the % menu. 2.
4. To add a header or footer to your document, select Header/Footer, then select Settings to customize the text and location. 5. Select any of the Additional Settings options to customize your print.
Color Controls Lets you select a Color Mode setting, individual settings for Brightness, Contrast, Saturation, and Density, and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting. Fix Photo Improves the color, contrast, and sharpness of flawed photos. Note: Fix Photo uses a sophisticated face recognition technology to optimize photos that include faces. For this to work, both eyes and the nose must be visible in the subject's face.
Header/Footer Settings - Windows You can select any of the Header/Footer Settings options to add headers or footers when you print. The items are available to print at the top or bottom of your pages, in either the left, right, or center of the page. Note: These settings are not saved with your document.
2. Place your cursor over one of the Printing Presets to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK.
Printing Your Document or Photo - Windows Once you have selected your print settings, you are ready to save your settings and print. 1. Click OK to save your settings. You see your application's Print window, such as this one: 2. Click OK or Print to start printing. Parent topic: Printing with Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in that program session.
You see the printer settings window: 3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK. These settings are now the defaults selected for printing. You can still change them as needed for printing in any program session. Changing the Language of the Printer Software Screens Parent topic: Printing with Windows Changing the Language of the Printer Software Screens You can change the language used on the Windows printer software screens. 1.
3. Click the Maintenance tab. You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product software.
You see this window: 3. Do one of the following: • To change how often the software checks for updates, select a setting in the Check every menu. • To disable the automatic update feature, select the Never option. 4. Click OK to exit. Note: If you choose to disable the automatic update feature, you can check for updates manually.
Selecting Double-sided Printing Settings - Mac OS X Managing Color - Mac OS X Selecting Printing Preferences - Mac OS X Printing Your Document or Photo - Mac OS X Parent topic: Printing From a Computer Selecting Basic Print Settings - Mac OS X Select the basic settings for the document or photo you want to print. 1. Open a photo or document for printing. 2. Select the print command in your application.
Note: The print window may look different, depending on the version of Mac OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing. 6. Select the page setup options: Paper Size and Orientation. Note: If you do not see these settings in the print window, check for them in your application before printing.
7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings from the pop-up menu. You see these settings: 9. Select the Paper Source you wish to print from.
10. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 11. Select the Print Quality setting you want to use. 12. Select any of the available print options.
Economy For fast printing with reduced quality. Normal For everyday text and image printing. Fine For text and graphics with good quality and print speed. Quality For photos and graphics with good quality and print speed. High Quality For photos and graphics with high print quality. Best Quality For the best print quality, but the slowest print speed. Parent topic: Selecting Basic Print Settings - Mac OS X Print Options - Mac OS X You can select any of the print options to customize your print.
Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 1. Select the size of the paper you loaded as the Paper Size setting. If you are printing a borderless photo, select the Borderless checkbox or a paper size with a Borderless option. You can also select a custom setting to create a custom paper size.
• To print multiple pages on one sheet of paper, select the number of pages in the Pages per Sheet pop-up menu. To arrange the print order of the pages, select a Layout Direction setting. • To print borders around each page on the sheet, select a line setting from the Border pop-up menu. • To invert or flip the printed image, select the Reverse page orientation or Flip horizontally settings.
Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network. This screen may be different, depending on the version of Mac OS X you are using. 1. Select one of the Two-sided Printing options.
2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 3. If necessary, customize the Adjustments settings as instructed on the screen. 4. Print a test copy of your double-sided document to test the selected settings. 5. Follow any instructions displayed on the screen during printing.
Short-Edge binding Orients double-sided printed pages to be bound on the short edge of the paper. Adjustments Print Density Sets the level of ink coverage for double-sided printing. Increased Ink Drying Time Sets the amount of time required for drying ink after printing on one side of the paper before printing the other side in double-sided printing.
3. Select Color Options from the pop-up menu in the print window. Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu. 4. Select one of the available options. Color Matching and Color Options - Mac OS X Parent topic: Printing with Mac OS X Color Matching and Color Options - Mac OS X You can select from these settings on the Color Matching and Color Options menus.
Color Options Settings Manual Settings Lets you select manual color adjustments. Click the arrow next to Advanced Settings and select settings for Brightness, Contrast, Saturation, and individual color tones. You can also select a color Mode setting for printing photos and graphics and the Fix Red-Eye setting to reduce or remove redeye in photos. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting.
4. Select any of the available printing preferences. 5. Click OK. Printing Preferences - Mac OS X Parent topic: Printing with Mac OS X Printing Preferences - Mac OS X You can select from these settings on the Driver tab. Skip Blank Page Ensures that your product does not print pages that contain no text or images. Quiet Mode Lessens noise during printing when you select Plain Paper/Bright White Paper as the paper Type or Media Type setting.
Remove white borders Removes white margins that may appear when you print borderless photos. Warning Notifications Lets you choose whether or not to receive warning notifications from the printer software when ink is low. Parent topic: Selecting Printing Preferences - Mac OS X Printing Your Document or Photo - Mac OS X Once you have selected your print settings, you are ready to print. Click Print at the bottom of the print window.
2. Select the following options as necessary: Mac OS X 10.5/10.6/10.7: • To cancel printing, click the print job and click the Delete icon. • To pause a print job, click the print job and click the Hold icon. To resume a print job, click the print job marked "Hold" and click the Resume icon. • To pause printing for all queued print jobs, click the Pause Printer icon. • To check ink status, click the Supply Levels icon. Mac OS X 10.8: • To cancel printing, click the • To pause a print job, click the button.
Cancelling Printing Using a Product Button If you need to cancel printing, press the Stop/Reset button on your product.
Scanning You can scan original documents or photos and save them as digital files. Starting a Scan Selecting Epson Scan Settings Scanning with Mac OS X Using Image Capture Scanning Special Projects Starting a Scan After placing your original documents or photos on your product for scanning, start scanning using one of these methods.
4. Select a scan option. • Scan to Memory Card saves your scan file on a memory card and lets you select the file format, quality, and other settings. • Scan to Cloud sends your scanned files to a destination that you have registered with Epson Connect. • Scan to PC saves your scan as a JPEG file to your computer or as an image capture in Mac OS X 10.6/10.7/10.8. • Scan to PC (PDF) saves your scan as a PDF file to your computer or as an image capture in Mac OS X 10.6/10.7/10.8.
• If your product is connected to your computer over a network, select the computer name from the list to start scanning. Scan to Memory Card Options Changing Default Scan Button Settings Parent topic: Starting a Scan Related tasks Using Epson Scan to Cloud Scan to Memory Card Options Select the Scan to Memory Card options you want to use.
Scan to Memory Card setting Available options Description Contrast –4 to +4 Adjusts the contrast for scanned images; negative settings make images lighter and positive settings make images darker. Parent topic: Starting a Scan Using the Product Touch Panel Changing Default Scan Button Settings You can view or change the default scan settings your product uses when you scan to your computer using the product buttons. You do this using the Event Manager program. 1.
• OS X: Open the Applications folder, open the Epson Software folder, and double-click the EPSON Scan icon. Note: With OS X 10.6, 10.7, 10.8, or 10.9, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo correction features for enhancing scanned images, and provides an interface for TWAIN-compliant OCR scanning software, such as ABBYY FineReader.
Parent topic: Starting a Scan Related tasks Scanning with Mac OS X Using Image Capture Related topics Selecting Epson Scan Settings 109
Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scanned image in the program. Note: With OS X 10.6, 10.7, 10.8, or 10.9, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo correction features for enhancing scanned images, and provides an interface for TWAINcompliant OCR scanning software, such as ABBYY FineReader.
Note: Epson Scan may start in a different mode when you first access it.
Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan Modes Selecting the Scan Mode Scanning in Office Mode Scanning in Home Mode Scanning in Professional Mode Image Preview Guidelines Scan Resolution Guidelines Selecting Scan File Settings Parent topic: Scanning Scan Modes Epson Scan provides a choice of scan modes with different levels of control over your settings.
Parent topic: Selecting Epson Scan Settings Scanning in Office Mode When you scan in Office Mode, Epson Scan automatically saves your scanned file in JPEG format in your operating system's Pictures or My Pictures folder, or opens it in your scanning program. You can select settings, preview, and change the scanned file settings as necessary. 1. Start Epson Scan and select Office Mode as the Mode setting.
2. Select the Image Type setting that matches your original. 3. Select the Document Source setting indicating where you placed your original. To scan a 2-sided document in the ADF, select ADF-Double-sided. Note: If you are using the ADF, remove any documents from the scanner glass.
4. Select the Size and Orientation settings that match your original. 5. Select the Resolution setting you want to use for your scan. 6. Click the Preview button. Epson Scan previews your original and displays the result in a separate Preview window. 7. If you are using the ADF, reinsert your original into the ADF. 8. If desired, select the area in your preview image that you want to scan (scan area). Note: You cannot select a scan area if you chose ADF-Double-sided as the Document Source setting. 9.
Auto Detect Automatically detects where the originals are placed on your product for scanning. ADF - Single-sided Selects the Automatic Document Feeder as the location where the originals are placed on your product for single-sided scanning. ADF - Double-sided Selects the Automatic Document Feeder as the location where the originals are placed on your product for double-sided scanning. Document Table Selects the scanner glass as the location where the originals are placed on your product for scanning.
1. In the Preview window, click the preview image. Auto Locate icon to create a marquee (dotted line) on the 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • To create additional marquees (up to 50, if available), click the existing marquee and paste it on the preview image. Copy Marquee icon to copy the Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan.
Note: Select the Image Option checkbox if you need to set any of the grayed-out image adjustments beneath the checkbox. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges. Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only in your scanned image.
2. Select the Document Type setting that matches your original, such as Photograph or Text/Line Art. 3. Select the Image Type setting that matches your original.
4. Select the way you plan to use your scanned image as the Destination setting. (The Resolution setting is selected automatically based on the Destination setting you choose.) • Screen/Web: Select this option for images you will email, view on a computer screen, or post on the web. • Printer: Select this option for images you will print or documents you will convert to editable text using OCR (Optical Character Recognition) software.
Selecting a Scan Area - Home Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it. You can even select multiple scan areas to create multiple scanned images of different areas (Normal Preview mode only). You can also use the scan area to select specific Image Adjustments settings for a scanned image. Just be sure to click inside the scan area before selecting the settings. 1.
• Normal preview: Click the image.
2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.
• Normal preview: To create additional marquees (up to 50), click the copy the existing marquee and paste it on the preview image. Copy Marquee icon to Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan. Otherwise, only the area inside the currently selected marquee will be scanned. • To delete a marquee, click the marquee, then click the Delete Marquee icon. 3.
Dust Removal Removes dust marks from your originals automatically. Text Enhancement Sharpens the appearance of letters in text documents. Auto Area Segmentation Makes grayscale images clearer and text recognition more accurate by separating the text from the graphics. Brightness Adjusts the overall lightness and darkness of the scanned image. Contrast Adjusts the difference between the light and dark areas of the overall scanned image.
3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not change the target size of the scanned file. The marquee only indicates the area of the image that will be scanned.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save, and click OK. Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size.
2. Select the Document Type setting that matches your original, such as Reflective for documents or photos. 3. Select the Document Source setting indicating where you placed your original. To scan a 2-sided document in the ADF, select ADF - Double-sided. Note: If you are using the ADF, remove any documents from the scanner glass. 4. Select the specific type of original you are scanning as the Auto Exposure Type setting: Document or Photo. 5.
Available Image Types - Professional Mode Selecting a Scan Area - Professional Mode Available Image Adjustments - Professional Mode Selecting a Scan Size - Professional Mode Parent topic: Selecting Epson Scan Settings Related concepts Image Preview Guidelines Scan Resolution Guidelines Related tasks Scanning in Office Mode Scanning in Home Mode Selecting Scan File Settings Available Document Source Settings - Professional Mode You can select these Document Source options in Epson Scan Professional Mode.
Black & White Select this setting for black text documents or line art. Parent topic: Scanning in Professional Mode Selecting a Scan Area - Professional Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it. You can even select multiple scan areas to create multiple scanned images of different areas (Normal Preview mode only).
• Thumbnail preview: Your scan area is selected automatically, but you can change it. Place your cursor in one corner of the desired scan area, then click and drag the cursor to the opposite corner to create a marquee (dotted line) on the preview image.
2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.
• Normal preview: To create additional marquees (up to 50, if available), click the Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Copy Delete Marquee icon. Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan. Otherwise, only the area inside the currently selected marquee will be scanned. 3.
Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only in your scanned image.) Color Restoration Restores the colors in faded photos automatically. Backlight Correction Removes shadows from photos that have too much background light. Dust Removal Removes dust marks from your originals automatically.
Threshold Adjusts the level at which black areas in text and line art are delineated, improving text recognition in OCR (Optical Character Recognition) programs. Parent topic: Scanning in Professional Mode Selecting a Scan Size - Professional Mode You can reduce or enlarge the size of your image as you scan. You can also select a specific scan size, such as a common photo size like 4 × 6 inches (102 × 152 mm).
3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not change the target size of the scanned file. The marquee only indicates the area of the image that will be scanned.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save, and click OK. Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. 6. To use additional sizing tools, click the + (Windows) or setting and select options as desired. (Mac OS X) icon next to the Target Size • Scale: Reduces or enlarges your image by the percentage you enter.
• Trimming: Turns automatic image cropping on or off. • Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.
• Fax: 200 dpi Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. You can also select various optional settings that control how Epson Scan behaves when you scan and save files. The File Save Settings window may appear after you click Scan on the Epson Scan window. You may also be able to access the window by clicking the 141 icon on the Epson Scan window.
1. Do one of the following to select the folder in which you want to save your scanned image: • Click the button for one of the displayed folders. • Click the Other button, click the Browse or Choose button, and select a folder. 2. Type in a stem file name in the Prefix field. This name is used along with numbers to automatically name your scanned files. 3. Select a different number as the Start Number setting, if you like. 4. Select the file format you want to use in the Image Format Type menu. 5.
PRINT Image Matching II (*.jpg or *.tif) File formats that include Epson PRINT Image Matching II data for enhanced quality and a wider color range (does not affect the way the image displays on the screen). TIFF (*.tif) A file format created for exchanging data between many programs, such as graphic and DTP software. Optional Settings Overwrite any files with the same name Select to overwrite previous files with the same names.
4. Select the Scan Mode setting indicating where you placed your original (if available). Select any other scan settings as necessary. 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan.
Your scanned file is saved in the folder you selected. Parent topic: Scanning Scanning Special Projects Your product's scanning software offers various options to help you quickly complete special scan projects. Scanning to a PDF File Restoring Photo Colors as You Scan Convert Scanned Documents to Editable Text (OCR) Parent topic: Scanning Scanning to a PDF File Using Epson Scan, you can scan a multi-page document and save it in one PDF (Portable Document Format) file on your computer. 1.
7. Select PDF as the Type setting. 8. Select any other settings you want to use on the File Save Settings window. Click the Options button to access additional settings. 9. Click OK.
10. Choose one of the following options on the screen: • If you are scanning only one page, click Save File. • If you need to scan additional pages in a document, click Add page. Place additional pages on the product for scanning, click Scan, and repeat until you have scanned all the pages. When you are finished, click Save File. • If you need to delete or reorder the scanned pages, click Edit page. Delete or reorder the pages using the icons that appear on the bottom of the editing window.
Related topics Placing Originals on the Product Restoring Photo Colors as You Scan You can restore the colors in faded photos as you scan them using Epson Scan's Color Restoration setting. You can select this setting in any of the available scan modes. Note: Color restoration is not available in Office Mode, if Epson Scan offers that mode. 1. Place your original on your product for scanning. 2. Start Epson Scan. 3. Select the scan mode you want to use. 4. Select the scan settings for your scan. 5.
Convert Scanned Documents to Editable Text (OCR) You can scan a document and convert the text into data that you can edit with a word processing, spreadsheet, or HTML-editing program. This process is called OCR (Optical Character Recognition). To scan and use OCR, you need to install an OCR program, such as ABBYY FineReader. In Mac OS X 10.6/10.7/10.8, you can use ABBYY FineReader to convert scanned documents to editable text by first using an application such as Image Capture.
3. Select the language used in the document you are going to scan as the Document Language setting. 4. Click either the Scan to Other Formats icon or the icon that corresponds with the program you want to scan to. 5. If you see the Select Scanner window, select your product and click OK. Note: Do not select a WIA option for your product; it will not work correctly. You see the scan settings window. 6. Select your scan settings. 7. Click Preview and adjust the area you want to scan, if necessary. 8.
Your document is scanned and processed into editable text, then you see the Save As window. 10. Select a name and a file format for your document and click Save. The file is saved and then opened in an application associated with the file type you selected, if available on your system.
3. Open the Get Images From pop-up menu and select your product. 4. Select the language used in the document you are going to scan as the Document Language setting. 5. Select the type of document you are going to scan. Epson Scan starts in the last scan mode you used. 6. Select your scan settings and click Scan. Your document is scanned and you see the Epson Scan window while your document is converted to editable text. 7. Click Close to close the Epson Scan window and Preview window, if necessary.
You see the Save Converted File As window: 8. Click the Save button. The file is saved and then opened in an application associated with the file type you selected, if available on your system.
Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or dispose of the product. This will erase all of your network settings and fax data.
1. Connect a phone cable to your telephone wall jack and to the LINE port on your product. Note: If you have a DSL or ISDN connection, you must connect the appropriate DSL filter, or ISDN terminal adapter or router to the wall jack to be able to use the line for faxing or voice calls using your product. Contact your DSL or ISDN provider for the necessary equipment.
1 Telephone wall jack 2 DSL filter 3 DSL modem ISDN connection (one phone number) 156
1 ISDN wall jack 2 Terminal adapter or ISDN router ISDN connection (two phone numbers) 157
1 ISDN wall jack 2 Terminal adapter or ISDN router 158
2. If you are connecting a telephone or answering machine to your product using a second phone cable, remove the cap from the EXT port on your product.
3. Connect a second phone cable to your telephone or answering machine and to the EXT port on your product. Note: If you connect an answering machine and Auto Answer mode is turned on, set the number of rings before your product answers a call to a number that is higher than your answering machine's setting for the number of rings. Any phone or answering machine must be connected to the EXT port for your product to detect an incoming fax call when the phone is picked up.
Setting Up Fax Features Using the Product Control Panel Setting Up Fax Features Using the Fax Utility - Windows Setting Up Fax Features Using the Fax Utility - Mac OS X Parent topic: Faxing Setting Up Fax Features Using the Product Control Panel See these sections to set up fax features using the product control panel.
3. Scroll down and select Printer Setup. 4. Scroll down and select Country/Region. 5. Scroll up or down, if necessary, then select your country or region. You see a confirmation screen. 6. If the setting is correct, select Yes. (If not, select No and retry.) Note: Changing the country or region restores the fax settings to the default settings.
3. Select Printer Setup. 4. Select Daylight Saving Time. 5. Select the setting that applies to your area: • Winter: it is winter or your region does not use Daylight Saving Time (DST) • Summer: it is spring or summer and your region uses Daylight Saving Time (DST) After making a selection, you return to the Printer Setup screen. Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the season.
6. Select Date/Time. 7. Select the date format you want to use. 8. Use the numeric keypad to enter the current date, then select Done. 9. Select the time format you want to use. 10. Use the numeric keypad to enter the current time, select AM or PM if you selected a 12-hour time format, then select Done. You return to the Printer Setup screen.
3. Scroll down and then select Fax Settings. 4. Select Communication. 5. Scroll down and then select Header. 6. Select Fax Header. 7. Use the numeric keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. 8. Select Done. You return to the Header screen.
9. Select Your Phone Number. 10. Use the numeric keypad to enter your fax number, up to 20 characters. For international numbers that require use of a + symbol, press the # key. Note: When entering a phone number, the * key does not work. 11. Select Done. You return to the Header screen.
• To enter text or characters, press the keys on the numeric keypad until the desired character or number appears. • To enter symbols, press the 1 Symb. key until the desired symbol appears. • To enter a pause symbol (–) in phone numbers requiring a brief pause during dialing, press • To move the cursor to the next space, press • To delete the previous character, press . . Parent topic: Setting Up Fax Features Using the Product Control Panel 167 .
Selecting Fax Send and Receive Settings You can select the fax quality and other settings for incoming and outgoing faxes. 1. Press the home button, if necessary. 2. Press the left or right arrow button and then select Setup. 3. Scroll down and then select Fax Settings. 4. Select Send Settings or Receive Settings. 5. Change any of the available settings. 6. Press the home button to exit.
3. Scroll down and then select Fax Settings. 4. Select Communication. 5. Change any of the available settings. 6. Press the home button to exit. Parent topic: Setting Up Fax Features Using the Product Control Panel Related references Fax Communications Options Printing Fax Reports You can run a variety of reports on your fax transmissions and print your speed and group dial lists.
3. Select Fax. 4. Select Advanced Options. 5. Scroll down and then select Fax Report. 6. Select one of the available reports. 7. Press one of the buttons to print the report.
Related references Fax Report Options Restoring Default Fax Settings You can restore your fax settings to their default options, if necessary. 1. Press the home button, if necessary. 2. Press the left or right arrow button and then select Setup. 3. Scroll down and then select Restore Default Settings. 4. Select one of the available options. You see a confirmation screen. 5. Select Yes or No.
Setting Options Description Resolution Standard Provides good scan resolution and print quality for most faxes. Fine Provides best scan resolution and print quality for faxes of small print and line art. Photo Provides best scan resolution and print quality for faxed photos. Contrast to –4 to +4 Adjusts the contrast for faxes; negative settings make faxes lighter and positive settings make faxes darker. 2-Sided Faxing Off Lets you fax 2-sided originals placed in the ADF.
Setting Options Description Paper Source Cassette 1 Prints faxes on paper loaded in Cassette 1 (upper cassette) Cassette 2 Prints faxes on paper loaded in Cassette 2 (lower cassette) Cassette 1>Cassette 2 Automatically switches the paper source when Cassette 1 is empty (plain paper only) On Reduces size of incoming faxes to fit on the size of paper selected as the Paper Size setting. Off Prints incoming faxes in original size or on multiple sheets, if loaded paper size is smaller.
Setting Options Description Rings to Answer 1 to 9 Sets the number of rings before your product receives a fax. The default setting is 4. If Auto Answer is turned on and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to answer a call. Dial Tone Detection On Automatically dials the phone number you enter to send a fax when the product detects a dial tone on the line.
Protocol Trace Print a protocol trace of your last fax transmission. Parent topic: Setting Up Fax Features Using the Product Control Panel Restore Default Settings Options Select the product settings you want to restore. Fax Send/Receive Settings Restores all of the default fax settings on the Send Settings, Receive Settings, and Communication screens. Fax Data Settings Erases the speed dial list, group dial list, header, and fax log. Wi-Fi/Network Settings Restores all of the default network settings.
3. Select Fax Settings for Printer. (Select your product, if prompted.
4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility Help option. Parent topic: Setting Up Fax Features Related topics Setting Up Fax Features Using the Product Control Panel Setting Up Fax Features Using the Fax Utility - Mac OS X You can set up your fax header and select your fax settings using the FAX Utility for Mac OS X. 1. Do one of the following: • Mac OS X 10.
3. Select your FAX product in the Printer list. 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility ? icon. Parent topic: Setting Up Fax Features Related topics Setting Up Fax Features Using the Product Control Panel Setting Up Speed Dial and Group Dial Lists You can set up a speed dial list of fax numbers so you can quickly select them for faxing.
Note: You can create up to 60 speed dial and group dial entries combined. 1. Press the home button, if necessary. 2. Select Fax. 3. Select Contacts. 4. Select Add/Edit Contacts. 5. Select Speed Dial Setup. 6. Select the number you want to use for the fax number you are adding.
7. Use the numeric keypad to enter the fax number. You can enter up to 64 characters. 8. Select Done. You see this screen: 9. Use the numeric keypad to enter a name for the speed dial entry. You can enter up to 30 characters. 10. Select Done. You return to the Add/Edit Contacts screen. 11. Do the following as necessary: • To create additional entries, select Speed Dial Setup and repeat the steps above. • To edit an existing entry, select Edit Contacts, select the entry, and change the information.
3. Select Fax. 4. Select Advanced Options. 5. Scroll down and then select Fax Report. 6. Scroll down and then select Speed Dial List. 7. Press one of the buttons to print the report.
Creating Group Dial List Entries You can create a group dial list after creating a speed dial list. Each group dial list can include up to 30 fax numbers. Note: You can create up to 60 speed dial and group dial entries combined. 1. Press the home button, if necessary. 2. Select Fax. 3. Select Contacts. 4. Select Add/Edit Contacts. 5. Select Group Dial Setup. 6. Select the number you want to use for the group dial entry you are adding. 7. Use the numeric keypad to enter a name for the group dial entry.
12. Do the following as necessary: • To create additional entries, select Group Dial Setup and repeat the steps above. • To edit an existing entry, select Edit Contacts, select the entry, and change the information. • To delete an entry, select Delete Contacts, select the entry, select Proceed, and confirm the deletion.
5. Scroll down and then select Fax Report. 6. Scroll down and then select Group Dial List. 7. Press one of the buttons to print the report. Parent topic: Setting Up Speed/Group Dial Lists Using the Product Control Panel Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows You can set up your speed dial and group dial lists using the FAX Utility for Windows. The utility also lets you import fax numbers from the Windows Address Book and back up fax numbers stored in your product's memory.
3. Select Fax Settings for Printer. (Select your product, if prompted.
4. Select Speed Dial/Group Dial List. You see this window: 5. Select an empty entry and click the icon. Note: To edit an entry, select it and click the icon. icon. To delete an entry, select it and click the 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group, enter a name, select your desired fax numbers, and click OK. 7.
Parent topic: Setting Up Speed Dial and Group Dial Lists Related topics Setting Up Speed/Group Dial Lists Using the Product Control Panel Setting Up Speed/Group Dial Lists Using the Fax Utility - Mac OS X You can set up your speed dial and group dial lists using the FAX Utility. The utility also lets you import fax numbers from the MacAddress Book and back up fax numbers to your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1.
You see this window: 5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group Dial, enter a name, select your desired fax numbers, and click OK. 7.
Fax Sending Options Parent topic: Sending Faxes Manually Dialing or Redialing Fax Numbers You can send a fax from your product control panel by manually dialing the fax number or redialing the last dialed fax number. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Select Fax. 4. Do one of the following: • Select the Enter Fax Number area on the LCD display, then use the numeric keypad to enter the fax number. You can enter up to 64 characters.
6. Press one of the glass). buttons. If prompted, select where you placed your document (ADF or scanner Note: To cancel faxing, select Cancel. Your product scans your original and prompts you to place additional pages, if necessary. After scanning your originals, your product dials the number and sends the fax. Note: If the number is busy or there is a communication problem, your product displays a redialing message and will redial the number in a few minutes.
3. Select Fax. 4. Select Contacts. 5. Select the speed dial or group dial entry you want to use. 6. If you need to change any fax settings, scroll down and select your settings. Note: If your recipient's fax machine does not print in color, your fax is automatically sent in blackand-white. 7. Press one of the glass). buttons. If prompted, select where you placed your document (ADF or scanner Note: To cancel faxing, select Cancel.
Related topics Placing Originals on the Product Setting Up Speed/Group Dial Lists Using the Product Control Panel Dialing Fax Numbers from a Connected Telephone If you have connected a telephone to the EXT port on your product, you can send a fax by dialing the fax number from the connected telephone. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Select Fax. 4. Dial the fax number from the connected telephone. 5. Select Send on the LCD display.
7. Press one of the glass). buttons. If prompted, select where you placed your document (ADF or scanner Note: To cancel faxing, select Cancel. Your product scans your original and prompts you to place additional pages, if necessary. 8. Hang up the telephone. After scanning your originals, your product sends the fax.
4. Select Advanced Options. 5. Select Broadcast Fax. 6. Select Add New then do one of the following: • Select Enter Fax Number then use the numeric keypad to manually enter fax numbers. • Select Select From Contacts then select a speed or group dial entry. 7. Repeat the step above to add additional fax recipients, if necessary. 8. When you have finished selecting your recipients, select Done. 9. If you need to change any fax settings, scroll down and select your settings. 10. Press the glass). B&W button.
3. Select Fax. 4. Enter a phone number or select a number from a speed or group dial list. 5. Select Advanced Options. 6. Select Send Fax Later. 7. Select On, use the number pad to enter your desired time, then select Done. 8. If you need to change any fax settings, scroll down and select your settings. 9. Press the glass). B&W button. If prompted, select where you placed your document (ADF or scanner Note: To cancel faxing, select Cancel.
Setting Options Description Resolution Standard Provides good scan resolution and print quality for most faxes. Fine Provides best scan resolution and print quality for faxes of small print and line art. Photo Provides best scan resolution and print quality for faxed photos. Contrast Various levels Adjusts the contrast for faxes; negative settings make faxes lighter and positive settings make faxes darker. 2-Sided Faxing Off Lets you fax 2-sided originals placed in the ADF.
2. Select your product with the FAX option as the printer. 3. To change the Paper Size, Orientation, Color, Image Quality, or Character Density settings, click the Preferences or Properties button. Note: If you see a Setup, Printer, or Options button, click it. Then click Preferences or Properties on the next screen. For more information about selecting fax print settings, click Help. 4. Select the Page Range as necessary. (Leave the Number of copies set to 1.) 5. Click Print.
6. Enter your sender information so that recipients can identify the origin of the fax. Then click OK to save the sender information. 7. Add a cover sheet, input a fax number, or set up a phone book of numbers for future use, then click Next. Note: For detailed instructions on using the Epson FAX Utility, click Help. 8. If you added a cover sheet to your fax, select a cover sheet style, enter your subject and comment information, then click Next. 9. Click Send to transmit your fax.
1. Open the file you want to fax. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. Select your product FAX option as the Printer setting. 4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window. 5. Select the number of pages you are faxing as the Pages setting.
7. Do one of the following to choose your recipient: • Select a name or group from the Recipient List. • Enter a name, company, and fax number and click the + button. • Click the icon and select a recipient from your address book. 8. Select Fax Settings from the pop-up menu.
9. Select the Color and Image Quality settings you want to use for your fax. 10. Click Fax. Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product. Fax Reception Receiving Faxes Automatically (Auto Answer) Receiving Faxes Manually Parent topic: Faxing Fax Reception Your product will automatically receive and print faxes when you set fax reception to Auto Answer mode.
Receiving Faxes Automatically (Auto Answer) To receive and print faxes automatically, you can turn on Auto Answer mode. Check the on or not. auto answer icon on your product's Home screen to see if Auto Answer mode is turned To turn Auto Answer mode on or off, select Setup > Fax Settings > Receive Settings > Auto Answer. If an answering machine is connected, make sure the product's Rings to Answer setting is set higher than the number of rings your answering machine is set to answer a call.
1. When the connected telephone rings, answer the call. 2. If you hear a fax tone, select Receive on the LCD display. 3. Press one of the buttons, then hang up the phone. 4. Press one of the buttons again to print the fax.
Using Memory Cards With Your Product Follow the instructions here to work with a memory card inserted into your product. Inserting a Memory Card Printing from a Memory Card Transferring Photos on a Memory Card Inserting a Memory Card Insert only one memory card at a time into a memory card slot on your product. 1. Make sure the memory card and the files on it are compatible with your product before inserting the card. 2.
Parent topic: Using Memory Cards With Your Product Memory Card Types You can insert these types of memory cards in your product. Note: Cards marked with an asterisk (*) require an adapter; consult your adapter documentation for details on using it.
Removing a Memory Card After you finish working with a memory card, you can check to make sure it is safe to remove it from your product. Caution: Do not remove a memory card or turn off your product while the memory card access light is flashing or you may lose data from the memory card. 1. Make sure the memory card access light is not flashing. 2.
Viewing and Printing Photos See these sections to view and print photos displayed on your product's LCD screen.
5. Press + to select the photo for printing. 6. To adjust your image and print settings, do the following as necessary: • To print more than one copy of the photo, select + or – to set the number (up to 99). • To change the print settings, select Settings, and select the necessary settings. • To adjust the image, select Edit > Photo Adjustments, then select your settings. • To crop or zoom into your photo, select Edit > Crop/Zoom, then select the icons displayed on the LCD screen to crop your image.
Printing All Photos You can quickly select all of the photos on your memory card or other device for printing. 1. Press the home button, if necessary. 2. Select More Functions. 3. Select Print Photos. You see a screen like this: 4. Select Options, then choose Select Photos. 5. Choose Select All Photos.
6. Select + or – to set the number of copies you want of each photo, then select Done. 7. Select Settings and choose the print settings for all of your photos. 8. When you are ready to print, press the Color button. Note: To cancel printing, select Cancel. Parent topic: Viewing and Printing Photos Related references Photo Adjustment Options Print Setting Options - Photo Mode Printing Photos by Date You can select photos for printing based on the date the photos were taken. 1.
4. Select Options, then choose Select Photos. 5. Choose Select by Date. You see a screen like this: 6. Select any date shown, then select Proceed. 7. Select + or – to set the number of copies you want of each photo, then select Done. 8. Select Settings, and choose the print settings for all of your photos.
9. When you are ready to print, press the Color button. Note: To cancel printing, select Cancel. Parent topic: Viewing and Printing Photos Related references Print Setting Options - Photo Mode Photo Adjustment Options Cropping Photos Displayed on the LCD Screen If you want to crop a photo displayed on the LCD screen, select Edit > Crop/Zoom and select the necessary options. • To crop the photo, select + to move the yellow crop area inward or – to move the crop area outward.
You see this screen: 2. Select a photo adjustment setting. 3. Select an option for the setting. Note: To clear any previously used settings, press the 4. When you finish selecting settings, press the Stop/Reset button. back button. Parent topic: Viewing and Printing Photos Related references Photo Adjustment Options Photo Adjustment Options Select the Photo Adjustment options you want to use when viewing and printing photos displayed on the LCD screen.
Photo adjustment settings Available options Description Fix Photo Fix Photo On Automatically adjusts the brightness, contrast, and saturation of the photo based on the Scene Detection setting that is selected Fix Photo Off Turns off automatic adjustments; see Note below P.I.M.
Selecting Print Settings for Photos Displayed on the LCD Screen You can change the settings used for printing photos displayed on the LCD screen. 1. Select Settings. You see this screen: 2. Select a print setting. 3. Select an option for the setting. Note: To clear any previously used settings, press the 4. When you finish selecting settings, press the Stop/Reset button. back button.
Print settings Available options Description Paper Type Various paper types Indicates the type of paper you have loaded; see the list of paper types for copying (available options depend on the selected Paper Size setting) Paper Source Cassette 1 Prints on paper loaded in Cassette 1 (upper cassette) Cassette 2 Prints on paper loaded in Cassette 2 (lower cassette) Cassette 1>Cassette2 Automatically switches the paper source when Cassette 1 is empty (plain paper only) Standard Quality Provides g
4. Scroll down to view all the options, then select the layout you want. 5. Select Paper Size, then select the size that matches the paper you loaded. 6. Select Paper Type, then select the type that matches the paper you loaded. 7. Select Proceed. Depending on the layout you selected, you may see this screen: 8. If you see the screen above, do one of the following: • To allow your product to place the photos in the layout automatically, select Automatic layout.
• To place photos in the layout manually, select Place photos manually and follow the instructions displayed on the screen. 9. Select the photos you want to print. 10. Press + or – to select one or more copies of each photo (up to 99). 11. To select other photos for printing, scroll through your photos and repeat the selections above. Then select Proceed. 12. To print more than one copy of the photo layout sheet, select + or – to set the number (up to 99). Then select Proceed. 13.
Transferring Photos on a Memory Card You can transfer photos to and from a memory card inserted into a memory card slot on your product.
Related tasks Removing a Memory Card Transferring Photos from a Memory Card to Your Computer You can transfer photos to and from a memory card inserted into a memory card slot on your product and a computer connected to your product. Note: Do not transfer photos to and from a memory card while you are printing from the memory card. 1. Make sure your product is connected to a computer. 2. Insert a memory card into a memory card slot on your product. 3.
Using an External Device with Your Product Follow the instructions in these sections to use your product with an external device, such as a camera, USB flash drive, or other device.
4. Turn on your camera. You see this screen: 5. Follow the instructions that came with your camera to select and print your photos. When you finish printing, turn off your camera and disconnect it from the product.
Selecting Print Settings for Printing From a Camera Before printing from your camera, you can select the print settings you will use for printing your photos. 1. Press the home button, if necessary. 2. Select Setup. 3. Scroll down and select External Device Setup. You see this screen: 4. Select Print Settings. 5. Select the print settings you want to use, then press the back button. 6. Select Photo Adjustments. 7. Select the photo adjustments you want to use, then press the home button to exit.
Print settings Available options Description Paper Size Various paper sizes Indicates the size of paper you have loaded Paper Type Various paper types Indicates the type of paper you have loaded; see the list of paper types for copying (available options depend on the selected Paper Size setting) Paper Source Cassette 1 Prints on paper loaded in Cassette 1 (upper cassette) Cassette 2 Prints on paper loaded in Cassette 2 (lower cassette) Cassette 1 > Cassette 2 Automatically switches the paper
Photo Adjustments - Camera Select the Photo Adjustments options you want to use when printing photos from your camera. Photo adjustment settings Available options Description Fix Photo Fix Photo On Automatically adjusts the brightness, contrast, and saturation of the photo based on the Scene Detection setting that is selected Fix Photo Off Turns off automatic adjustments; see Note below P.I.
Viewing or Printing from a USB Flash Drive or External Device You can view and print photos from a USB thumb drive or other external storage device, such as an external hard drive or CD/DVD burner. Note: Make sure the files on your device are compatible with the product.
4. Insert storage media (such as a CD) into your drive, if necessary. 5. If there are folders on your storage media, select the folder you want and press the OK button. You can view and print your photos from the LCD screen. When you finish printing, make sure the access light on the drive is not flashing, then remove or disconnect it from the product. Caution: Do not remove the USB drive or turn off the product when the access light is flashing, or you may lose photos on the drive.
3. Leave your product on while charging (it will continue to charge even after going into sleep mode). Note: You cannot use the USB port to transfer images from your device to your computer. If you want to transfer images, use the memory card slots instead. Disconnect your portable device before inserting a memory card.
Printing Personalized Projects You can print lined paper, graph paper, or stationery with a photo background. Printing Personalized Note Paper Printing Lined Paper and Graph Paper Printing Personalized Note Paper You can print lined or unlined note paper with one of your own photos in the background. 1. Load plain paper in one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 2. Insert a memory card into your product's memory card slot. 3.
8. Select the photo you want to use as the background image. You see a preview of your note paper with the photo in the background. 9. Do one of the following as necessary: • To select a different photo, press the arrow buttons to scroll through your photos and select the one you want to use. • To rotate the layout, select Rotate. 10. When you're ready, select Proceed. You see a message asking you to load paper. 11. Select Proceed. 12.
Printing Lined Paper and Graph Paper You can print wide-rule or narrow-rule notebook paper and graph paper. 1. Load plain paper in one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 2. Press the home button, if necessary. 3. Select More Functions. 4. Scroll down and select Print Ruled Papers. You see this screen: 5. Select one of the options shown on the screen. 6. Select your paper size. 7.
Replacing Ink Cartridges and Maintenance Boxes The maintenance box stores ink that gets flushed from the system during print head cleaning. When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it. You may also need to replace a cartridge that is more than six months old if your printouts do not look their best, even after cleaning and aligning the print head.
Note: Displayed ink levels are approximate. 4. Do one of the following: • To exit, select OK.
2. Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status. 3. To disable the low ink reminder, right-click the product icon in the Windows taskbar and select Monitoring Preferences.
4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox.
Replacing the Maintenance Box Checking Cartridge and Maintenance Box Status With Mac OS X You can check the status of your ink cartridges and maintenance box using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7/10.8: In the Apple menu or the Dock, select System Preferences. Select Print & Fax or Print & Scan, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • Mac OS X 10.5: In the Apple menu or the Dock, select System Preferences.
3. Do the following as necessary: • You can update the ink cartridge and maintenance box status by clicking Update. • Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status.
Replacing the Maintenance Box Purchase Epson Ink Cartridges and Maintenance Box You can purchase genuine Epson ink, maintenance boxes, and paper at Epson Supplies Central at epson.com/ink3 (U.S. sales) or epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766). Note: We recommend that you use genuine Epson cartridges and do not refill them.
Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones. Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out. Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1.
3. Open the cartridge cover. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children. 4. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.
5. Gently shake the new cartridge four or five times as shown. Then remove the cartridge from the package. Caution: Do not remove any labels or seals, or ink will leak. Do not touch the green chip on the cartridge. Install the new cartridge immediately after removing the old one; if you do not, the print head may dry out and be unable to print. 6. Remove only the yellow tape.
7. Insert the new cartridge into the holder and push it down until it clicks into place. 8. Close the cartridge cover and push it down until it clicks into place. 9. Lower the scanner unit to begin ink priming. Caution: If you see a message that an ink cartridge is installed incorrectly, lift up the scanner unit, open the cartridge cover, and press the ink cartridge down until it clicks into place. Then close the cartridge cover and lower the scanner unit.
Note: Do not turn off the printer during ink priming. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge. Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area.
3. Access the print settings in your print application. 4. Click the Main tab. 5. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 6. Select the Black/Grayscale checkbox. 7. Click OK. 8. Print your document. Epson Status Monitor 3 displays a print message. 9. Click Print in Black to print your document.
6. Select On as the Permit temporary black printing setting. 7. Click OK. 8. Close the utility window. 9. Load plain paper or an envelope in your product. 10. Access the print settings in your print application. 11. Select Print Settings from the pop-up menu. 12. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 13. Select the Grayscale option. 14. Click Print to print your document.
Note: The window appears only when you have selected Plain Paper/Bright White Paper as the paper type setting, and depends on other selected print settings. To use this feature, Epson Status Monitor must be enabled. • Click Yes to use a mixture of color inks to create black, or No to continue using the remaining black ink for the document you are printing. • Click Disable this feature to continue using the remaining black ink.
3. Press the tabs and remove the duplexer (rear cover). 4. Grasp the maintenance box as shown and pull it out of its holder. Note: Do not tilt the used maintenance box or take it apart. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep the maintenance box out of the reach of children and do not drink the ink.
5. Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully. 6. Insert the new maintenance box into the holder and push it all the way in. 7. Reattach the duplexer (rear cover).
Parent topic: Replacing Ink Cartridges and Maintenance Boxes Related concepts Purchase Epson Ink Cartridges and Maintenance Box 249
Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head Maintenance Print Head Alignment Cleaning the Paper Path Related topics Replacing Ink Cartridges and Maintenance Boxes Print Head Maintenance If your printouts become too light, or you see dark or light bands across them, you may need to clean the print head nozzles.
1. Make sure plain paper is loaded in Cassette 1. 2. Press the home button, if necessary. 3. Select Setup. 4. Select Maintenance. You see this screen: 5. Select Nozzle Check.
6. Press one of the buttons. The nozzle pattern prints. 7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 8. Do one of the following: • If there are no gaps, select Done. • If there are gaps or the pattern is faint, select Clean the Print Head and continue. 9. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary.
2. Do one of the following: • Windows: Right-click the product icon in the Windows taskbar. • Mac OS X 10.6/10.7/10.8: In the Apple menu or the Dock, select System Preferences. Select Print & Fax or Print & Scan, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • Mac OS X 10.5: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, select your product, and select Open Print Queue. Select Utility. 3. Select Nozzle Check.
Print head needs cleaning 6. If there are no gaps, click Finish. If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Related topics Replacing Ink Cartridges and Maintenance Boxes Loading Paper Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the print head.
Cleaning the Print Head Using the Product Touch Panel You can clean the print head using the touch panel on your product. 1. Make sure plain paper is loaded in Cassette 1. 2. Press the home button, if necessary. 3. Select Setup. 4. Select Maintenance. You see this screen: 5. Select Head Cleaning.
6. Select Proceed. 7. Select the cleaning cycle you want to run. Note: Use the nozzle check pattern to determine which colors need cleaning. You can save ink by cleaning only selected colors. When the cleaning cycle is finished, you see a message on the screen. Caution: Never turn off the product during a cleaning cycle or you may damage it. 8. Select Print Nozzle Check Pattern. 9. Press one of the buttons to confirm that the print head is clean.
Cleaning the Print Head Using a Computer Utility You can clean the print head using a utility on your Windows computer or Mac. 1. Load a few sheets of plain paper in the cassette (or in cassette 1 if your product has two cassettes). 2. Do one of the following: • Windows: Right-click the product icon in the Windows taskbar. • Mac OS X 10.6/10.7/10.8: In the Apple menu or the Dock, select System Preferences. Select Print & Fax or Print & Scan, select your product, and select Options & Supplies.
4. Select the cleaning cycle you want to run, based on the nozzle check pattern. 5. Click Start to begin the cleaning cycle. The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may damage it. 6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print. 7.
Related topics Replacing Ink Cartridges and Maintenance Boxes Print Head Alignment If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning.
5. Select Print Head Alignment. You see this screen: 6. Press one of the buttons to print an alignment sheet. Note: Do not cancel printing while you are printing head alignment patterns. After the alignment sheet is printed, you see a series of screens asking you to select the best square in each pattern set. 7. Check the printed patterns and choose the number representing the best square for each set, then select Proceed. 8. After you have selected the number for all the sets, select Done.
• Mac OS X 10.6/10.7/10.8: In the Apple menu or the Dock, select System Preferences. Select Print & Fax or Print & Scan, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • Mac OS X 10.5: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, select your product, and select Open Print Queue. Select Utility. 3. Select Print Head Alignment. 4. Click Next, then click Print to print an alignment sheet.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment. Then print another alignment sheet and check it. Note: Click Skip (where available) if you want to skip a particular alignment sheet. 6. When you are done, click Finish. Parent topic: Print Head Alignment Cleaning the Paper Path If you see ink on the back of a printout, you can clean the paper path to remove any excess ink. 1. Load a few sheets of plain paper in the product. 2.
Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it. Do not use oil or other lubricants inside the product or let water get inside it.
Note: If lines appear on the printout or in scanned images, carefully clean the scanner glass on the left. 7. Open the ADF cover and use a soft, dry, lint-free cloth (microfiber is recommended), to clean the rollers and the interior of the ADF.
8. Clean the outer case and control panel with a soft, dry cloth. Do not use liquid or chemical cleansers. Parent topic: Cleaning and Transporting Your Product Transporting Your Product If you need to ship your product or transport it a long distance, prepare it for transportation as described here. Caution: During transportation and storage, follow these guidelines: • Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak. • Leave the ink cartridges installed.
Keep the product level during transportation. If print quality has declined when you print again, clean and align the print head.
Solving Problems Check these sections for solutions to problems you may have using your product.
• Mac OS X: You can manually update the software by opening the Applications > Epson Software folder and selecting EPSON Software Updater. Parent topic: Solving Problems Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. You can also see help information and how-to instructions on the screen. Press the home button, if necessary, press the left or right arrow button, and then select Help.
LCD screen message Condition/solution A printer's ink pad is at The ink pad is at the end of its service life. Turn off the product and contact the end of its service life. Epson for support. Please contact Epson Support. No dial tone detected. Try the Check Fax Connection. Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, turn off the Dial Tone Detection setting.
Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load plain paper in the product. 3. Press the home button, if necessary. 4. Press the left or right arrow button and then select Setup. 5. Select Maintenance. 6. Select Nozzle Check.
7. Press one of the buttons. The nozzle check pattern is printed. 8. Do one of the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstalling your printer software.
3. Scroll down and select Restore Default Settings. 4. Select one of these options: • Fax Send/Receive Settings: Resets all settings on the Send Settings, Receive Settings, and Communication screens. • Fax Data Settings: Erases the speed dial list, group dial list, header, and fax log. • Wi-Fi/Network Settings: Resets all network settings. • All except Wi-Fi/Network & Fax Settings: Resets all control panel settings, except for network and fax settings. • All Settings: Resets all control panel settings.
Noise After Ink Installation If you hear noises from your product after installing ink, try these solutions: • The first time you install ink cartridges, the product must prime its print head. Wait until priming finishes before you turn off the product, or it may prime improperly and use excess ink the next time you turn it on. Your product is finished priming the print head when the power light stops flashing.
Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.
Network Software Cannot Find Product on a Network If EpsonNet Setup cannot find your product on a network, try these solutions: • Make sure your product is turned on and connected to your network. Verify connection using your product control panel. • Check if your network name (SSID) contains non-ASCII characters. Your product cannot display nonASCII characters. • If necessary, reinstall your product software and try running EpsonNet Setup again: 1.
Cannot Print Over a Network If you cannot print over a network, try these solutions: • Make sure that your product is turned on. • Make sure you install your product's network software as described in your product documentation. • Print a network status sheet and verify that the network settings are correct. If the network status is Disconnected, check any cable connections and turn your product off and then on again.
Cannot Scan Over a Network If you cannot start Epson Scan for scanning over a network, try these solutions: • If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution. • If network communication was interrupted while starting Epson Scan, exit Epson Scan, wait a few seconds, and restart it. If Epson Scan cannot restart, turn off your product, turn it back on, and try restarting Epson Scan again.
2. Press the left or right arrow button and then select Setup. 3. Scroll down and select Wi-Fi/Network Settings. 4. Select Wi-Fi/Network Status. 5. Select Print the status sheet. at the bottom of the screen. 6. Press one of the buttons to print the network status sheet. (Select Cancel if you want to cancel the operation.) Examine the settings shown on the network status sheet to diagnose any problems you have.
• If the nozzle check page does not print, but the product's power is on, make sure your product software is installed correctly. • Make sure your product is level (not tilted). Parent topic: Solving Copying Problems Related concepts Print Head Nozzle Check Print Head Cleaning Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal.
• For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the cassette printable side down. • Do not load binder paper with holes in the cassette. • Follow any special loading instructions that came with the paper.
3. Lift the scanner unit. Caution: Do not touch the flat white cable inside the printer. Do not lift the scanner unit while the document cover is open. 4. Remove any paper inside, including torn pieces.
5. Close the scanner unit. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Related references Paper Jam Problems in the Paper Cassette Paper Jam Problems in the Duplexer (Rear Cover) Document Jams in the Automatic Document Feeder Paper Jam Problems in the Paper Cassette If paper has jammed in a paper cassette, follow the steps below to clear the jam. 1.
Note: If you cannot pull out the cassette, turn the product off, unplug it, and disconnect any cables. Then carefully stand the product on its side and remove the cassette. 3. Carefully remove any paper jammed inside the product.
4. Gently insert the paper cassette. 5. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Related references Paper Jam Problems in the Duplexer (Rear Cover) Paper Jam Problems Inside the Product Document Jams in the Automatic Document Feeder Paper Jam Problems in the Duplexer (Rear Cover) If paper has jammed in the duplexer (rear cover), follow the steps below to clear the jam. 1.
3. Carefully remove any jammed paper. 4. Remove any jammed paper from the duplexer.
5. Open the duplexer.
6. Carefully remove any jammed paper stuck inside. 7. Reattach the duplexer.
8. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Related references Paper Jam Problems in the Paper Cassette Paper Jam Problems Inside the Product Document Jams in the Automatic Document Feeder Document Jams in the Automatic Document Feeder If you have problems with document jams in the automatic document feeder (ADF), follow the steps below to clear the jam. 1.
Caution: Make sure you open the ADF cover before removing any jammed pages. Otherwise the product may be damaged. 4. Carefully remove any jammed pages. 5. Close the ADF cover, then open the document cover.
6. Carefully remove any jammed pages in the direction shown.
7. Close the document cover. 8. Raise the ADF input tray. 9. Carefully remove any jammed pages. 10. Lower the ADF input tray to its original position.
11. Reload your originals. Caution: Make sure you do not load the ADF beyond its capacity for your paper size. Also make sure your originals are not bent, folded, or curled and do not have tape, staples, or other materials that could obstruct the feeder. 12. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Nothing Prints Product Icon Does Not Appear in Windows Taskbar Error After Cartridge Replacement Printing is Slow Parent topic: Solving Problems Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your product is turned on. • Make sure any interface cables are connected securely at both ends. • If you connected your product to a USB hub, make sure it is a first-tier hub.
Product Icon Does Not Appear in Windows Taskbar If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does not work, try this solution: 1. Do one of the following: • Windows 8.x: Navigate to the Apps screen and select Control Panel > Hardware and Sound > Devices and Printers. • Windows 7: Click and select Devices and Printers. • Windows Vista: Click , select Control Panel, and click Printer under Hardware and Sound.
Related topics Replacing Ink Cartridges and Maintenance Boxes Printing is Slow If printing becomes slow, try these solutions: • Make sure your system meets the requirements for your operating system. If you are printing a highresolution image, you may need more than the minimum requirements. If necessary, increase your system's memory. • If you are using Windows 7, close the Devices and Printers window before you print.
Selecting Basic Print Settings - Mac OS X Solving Page Layout and Content Problems Check these sections if you have problems with the layout or content of your printed pages.
Related tasks Selecting Additional Layout and Print Options - Windows Selecting Basic Print Settings - Mac OS X Blank Pages Print If blank pages print unexpectedly, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software. • If a blank page exists in a document you are printing and you want to skip printing it, select the Skip Blank Page setting in your printer software.
Related topics Loading Paper Border Appears on Borderless Prints If you see a border on borderless prints, try these solutions: • Make sure you are printing on a compatible borderless paper type and size. Note: Do not select a custom paper size for borderless prints. • Windows: Make sure you selected the Borderless setting in your printer software. • Mac OS X: Make sure you selected the Borderless checkbox or a paper size with a Borderless option in your printer software.
• In Windows, delete all print jobs from the Windows Spooler: • Windows 8.x: Navigate to the Apps screen and select Control Panel > Hardware and Sound > Devices and Printers. Right-click your product name, select See what's printing, and select your product name again, if necessary. Right-click the stalled print job, click Cancel, and click Yes. • Windows 7: Click and select Devices and Printers. Right-click your product name, select See what's printing, and select your product name again, if necessary.
Slanted Printout If your printouts are slanted, try these solutions: • Slide the edge guides against the edges of the paper. • Select a higher print quality setting in your printer software. • Align the print head. • Make sure the product is not printing while tilted or at an angle.
• You may need to replace the ink cartridges.
• Clean the paper path. Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.
Parent topic: Solving Print Quality Problems Related concepts Print Head Nozzle Check Print Head Cleaning Print Head Alignment Related references Paper or Media Type Settings Related tasks Selecting Basic Print Settings - Windows Selecting Basic Print Settings - Mac OS X Cleaning the Paper Path Related topics Replacing Ink Cartridges and Maintenance Boxes Loading Paper Grainy Printout If your printouts are grainy, try these solutions: • Make sure you loaded the printable side of the paper correctly for you
Parent topic: Solving Print Quality Problems Related concepts Print Head Nozzle Check Print Head Cleaning Print Head Alignment Related references Printing Preferences - Mac OS X Related tasks Selecting Basic Print Settings - Windows Selecting Additional Layout and Print Options - Windows Selecting Basic Print Settings - Mac OS X Selecting Printing Preferences - Mac OS X Related topics Loading Paper Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the Black/Grayscal
Related tasks Selecting Basic Print Settings - Windows Selecting Additional Layout and Print Options - Windows Selecting Basic Print Settings - Mac OS X Managing Color - Mac OS X Related topics Replacing Ink Cartridges and Maintenance Boxes Solving Scanning Problems Check these solutions if you have problems scanning with your product.
Mac System Requirements Related tasks Scanning with Mac OS X Using Image Capture Cannot Start Epson Scan If you cannot start Epson Scan, try these solutions: • Make sure your product is turned on and any interface cables are securely connected at both ends. • Make sure Epson Scan is selected in your scanning program. • Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so, wake your system and restart Epson Scan.
Solving Scanned Image Quality Problems Check these sections if a scanned image on your computer screen has a quality problem.
Parent topic: Solving Scanned Image Quality Problems Related tasks Cleaning Your Product Straight Lines in an Image Appear Crooked If straight lines in an original appear crooked in a scanned image, make sure to place your original straight when you scan it.
Image is Too Dark If your scanned image is too dark, try these solutions: • Adjust these Epson Scan settings (if available) and try scanning again: • Auto Exposure • Brightness • Histogram Adjustment • Check the brightness and contrast settings of your computer monitor.
To adjust the colors in your scanned image, adjust these Epson Scan settings (if available) and try scanning again: • Change the Image Type setting and experiment with different combinations of the next settings. • Adjust the Tone Correction setting. • Adjust the Auto Exposure setting.
Cannot Receive Faxes with a Telephone Connected to Your Product Parent topic: Solving Problems Cannot Send or Receive Faxes If you cannot send or receive faxes, try these solutions: • Make sure the recipient's fax machine is turned on and working. • Make sure paper is loaded correctly in your product. • Make sure Auto Answer mode is turned on to receive faxes automatically. Check your product control panel to see if this mode is turned on.
Related topics Loading Paper Cannot Receive Faxes with a Telephone Connected to Your Product Make sure your telephone is connected to your product's EXT port. Note: When answering a call that is a fax, wait until the product's LCD screen displays a message that a connection has been made before you hang up.
• Make sure the files on your memory card are in the correct format. • If you have too many photos on your memory card, you may not see all the photos you expect or may be prompted to select a group of photos by date. Reduce the number of photos on your card or select one group of photos at a time. Check the memory card specifications for the maximum number of photos.
Parent topic: Solving Memory Card Problems When to Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions for your operating system. Uninstalling Product Software - Windows Uninstalling Product Software - Mac OS X Parent topic: Solving Problems Uninstalling Product Software - Windows You can uninstall and then re-install your product software to solve certain problems. 1. Turn off the product. 2.
• Windows XP: Open the Windows Control Panel utility. Double-click Add or Remove Programs. Select Epson Event Manager and click Change/Remove. 5. Do one of the following to uninstall Epson Scan, then follow any on-screen instructions: • Windows 8.x, Windows 7, or Windows Vista: Select EPSON Scan and click Uninstall/Change. • Windows XP: Select EPSON Scan and click Change/Remove. 6. Restart your computer, then see the Start Here sheet to re-install your software.
Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal.
Note: Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for the latest in compatibility and drivers for your product. Parent topic: Technical Specifications Mac System Requirements To use your product and its software, your Mac should use one of these operating systems: • Mac OS X 10.8.x • Mac OS X 10.7.x • Mac OS X 10.6.x • Mac OS X 10.5.8 Note: Visit Epson's support website at epson.com/support (U.S.) or epson.
Document size Maximum: 8.5 × 11.7 inches (216 × 297 mm) Scanner glass: US letter or A4 Scanning resolution 1200 dpi (main scan) 2400 dpi (sub scan) Output resolution 50 to 4800, 7200, and 9600 dpi (50 to 4800 dpi in 1 dpi increments) Image data 16 bits per pixel per color internal 8 bits per pixel per color external (maximum) Light source LED Note: Scanning area may be restricted if resolution setting is too large.
Support line Household phone line Speed Up to 33.6 kbps Resolution Monochrome Standard: 203 × 98 dpi Fine: 203 × 196 dpi Photo: 203 × 196 dpi Color Fine: 200 × 200 dpi Photo: 200 × 200 dpi Error correction mode CCITU/ITU Group 3 fax with error correction mode Speed dial/group dial numbers Up to 100 (combined) Page memory Up to 180 (ITU-T No.
Single-sheets Size A4 (8.3 × 11.7 inches [210 × 297 mm]) A6 (4.1 × 5.8 inches [105 × 148 mm]) Letter (8.5 × 11 inches [216 × 279 mm]) Legal (8.5 × 14 inches [216 × 357 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) 8 × 10 inches (203 × 254 mm) 3.5 × 5 inches (89 × 127 mm) 16:9 wide (4 × 7.1 inches [102 × 181 mm]) Paper types Plain paper and paper distributed by Epson Thickness 0.003 inch (0.08 mm) to 0.004 inch (0.11 mm) Weight 17 lb (64 g/m2) to 24 lb (90 g/m2) Envelopes Size No.
Single sheets 1 Top: 0.12 inch (3 mm) minimum 2 Left: 0.12 inch (3 mm) minimum 3 Right: 0.12 inch (3 mm) minimum 4 Bottom: 0.
1 Left: 0.12 inch (3 mm) minimum, 0.67 inch (17 mm) recommended 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.12 inch (3 mm) minimum, 1.
Weight 24.0 lb (10.9 kg) (without ink cartridges) Parent topic: Technical Specifications Electrical Specifications Power supply rating 100 to 120 V Input voltage range 90 to 132 V Rated frequency range 50/60 Hz Input frequency range 49.5/60.5 Hz Rated current 0.7 A Power consumption Standalone copying mode: 17 W (ISO/IEC24712) (Approximate) Ready mode: 6.2 W Sleep mode: 2 W Power off mode: 0.
Interface Specifications Interface type Hi-Speed USB (Device Class for computers) Hi-Speed USB (for Mass storage class for external storage) Note: Epson cannot guarantee the operation of externally connected devices. Parent topic: Technical Specifications External USB Device Specifications Note: Use only external storage devices with independent AC power sources. External storage devices that are powered via USB are not recommended. CD-R, DVD-R, and Blu-ray drives CD-ROM/CD-R: 700MB DVD-ROM/DVD-R: 4.
Compatible types SD SDHC miniSD* miniSDHC* SDXC miniSDXC* microSDXC* microSDHC* microSD* Memory Stick Duo Memory Stick PRO Duo Memory PRO-HG Duo Memory Stick Micro* MagicGate Memory Stick Duo Media format DCF DCF (Design rule for Camera File system) version 1.0 or 2.0 compliant Voltage requirements 3.3 V Parent topic: Technical Specifications Related references Memory Card File Specifications Network Interface Specifications Wireless LAN standard IEEE 802.
Communication mode Infrastructure mode Ad hoc mode Wi-Fi Direct Ethernet standard IEEE802.3i/u, IEEE802.3az Ethernet communication mode 100BASE-TX/10BASE-T Note: Wireless LAN standard complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on purchase location. Parent topic: Technical Specifications Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B class B Canada Safety: CAN/CSA C22.2 No.
Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal. FCC Compliance Statement Software Notice Trademarks Copyright Notice FCC Compliance Statement For United States Users This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments ("ACTA") .
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If you have problems with this product and require technical or customer support, please visit www.epson.com for more information. This product is not intended to be repaired by the customer.
interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
2. We provide the source code of the GPL Programs, LGPL Programs, Apache License Program and ncftp license Program (each is defined in Section 6) until five (5) years after the discontinuation of same model of this printer product. If you desire to receive the source code above, please contact the customer support of your region. You shall comply with the license terms of each open source software program. 3.
Apache License This printer product includes the open source software program "Bonjour" which apply the Apache License Version2.0 ("Apache License Program"). Bonjour License This printer product includes the open source software program "Bonjour " which applies the terms and conditions provided by owner of the copyright to the "Bonjour ".
This printer product includes the open source software program "AES" which applies the terms and conditions provided by owner of the copyright to the "AES". SHA1 license This printer product includes the open source software program "SHA1" which applies the terms and conditions provided by owner of the copyright to the "SHA1".
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson approved Products by Seiko Epson Corporation.
certain circumstances, those circumstances may not be as broad as some people assume. Contact your legal advisor for any questions regarding copyright law. Parent topic: Copyright Notice Default Delay Times for Power Management for Epson Products This product will enter sleep mode after a period of nonuse. This is to ensure that the product meets Energy Star standards of energy efficiency. More energy savings can be achieved by setting the time to sleep to a shorter interval.