Setup Guide

38 | Checking the Current Firmware Version

Checking the Current Firmware Version

1. Press the r button twice to highlight settings.

2. Press the Menu button.

3. Press the d button until Printer Status is highlighted, then press OK.

4. Press OK again. Note the firmware version displayed. When finished, press the button.

Updating the Firmware

Before updating your printer’s firmware, make sure your printer is turned on and connected to your

computer or network.

1. Click the EPSON LFP Remote Panel 2 icon on your desktop. You see the EPSON LFP Remote

Panel 2. Make sure your printer is selected from the drop-down menu.

2. Click the Firmware Updater button. You see the Firmware Updater window.

3. Click Acquire Latest Information to automatically download the latest firmware version for your

printer from the internet. If there is a firmware update, the message “Found the latest firmware

information. Do you want to download the firmware file?” appears. Click

Yes to download the file.

Note: If the Acquire Latest Information button fails to download the latest firmware, you can also find it by

visiting Epson’s support site epson.com/support (US) or global.latin.epson.com/Soporte (Latin America;

website available in Spanish and Portuguese). You need to download the latest version and upload it by

clicking Browse and locating the file, then continue from step 5.

When the message “File download complete” appears, click OK. The file you just downloaded should

automatically be selected and appear in the File Name window.

5. Click Update and follow the on-screen instructions.

6. If the firmware version of the file is newer than what is currently installed, click Update to start the

firmware updating process.

Caution: Don’t turn off the printer while the firmware is updating.

When the update is complete, close the Firmware Updater window and EPSON LFP Remote Panel 2

window.

T-Series_Setup_Guide_S.book Page 38 Tuesday, September 16, 2014 2:53 PM