Network Guide

Tips for Administrator 54
1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config
to find the printer.
2. A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection
may terminate when the lease or address expires.
Note:
Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port
Number.
Sample 3
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Group Policy settings for each client.
Refusing Access from Unauthorized Clients
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Default Policy settings as follows:
Administrator Client Settings
Separate settings must be created for each Group Policy in IPsec/Access Control.
Group policies are applied in order from Group Policy 1.
Option Setting
RAW (Port 9100) ENPC SNMP
Group Policy n
(n = 1–10)
Enable
Access Control Access Permission
Remote Address
(Host)
2
Enter the print client IP address (prefix length can be used to specify
range if desired).
Example (IPv4): 192.168.0.0/24
Method of Choose
Port
Service Name
Service Name RAW (Port 9100) ENPC SNMP
Option Setting
IPsec/Access Control Enable
Default Policy > Access Control Access Refuse