Operation Manual

B
Select Fit to Output Size and choose a paper size
that matches the paper in the printer.
C
Check other settings, and then start printing.
Note:
Output can also be fitted to the paper size by selecting
Scale to fit paper size in the print dialog Paper Handling
pane.
Printing at Non-Standard
Sizes
Before printing at non-standard sizes, including vertical
or horizontal banners and documents with equal sides,
save the desired paper size in the printer driver. Once
they have been saved in the printer driver, custom sizes
can be selected in the application Page Setup and other
print dialogs.
The following sizes can be used.
Paper
Width
SC-T7200 Series/
SC-T7200D Series
89 to 1,118 mm
SC-T5200 Series/
SC-T5200D Series
89 to 914 mm
SC-T3200 Series
89 to 620 mm
*1
Length
*2
Windows: 127 to 15,000 mm
Mac OS X: 127 to 15,240 mm
*1.The maximum printable width is 610 mm.
*2.The paper length can be longer if using applications that
support banner printing. However, the actual print size
depends on the application, the paper size loaded in the
printer, and the computer environment.
c
Important:
❏ The smallest size supported by the printer is
254 mm wide × 127 mm long. If a smaller size is
entered in the printer driver as a Custom
Paper Size, the document will print with
wider-than-expected margins, which must be
trimmed.
❏ For Mac OS X Custom Paper Sizes, although
you can specify a large paper size which cannot
be loaded on this printer, it will not be printed
properly.
❏ The available output size is limited depending
on the application.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
More Ways to Print
93