Operation Manual

Maintenance and Transportation 252
Over a short distance
If you need to move the printer over a short distance, be sure to
perform the following tasks.
❏ Raise the ink levers.
❏ Lift the printer, using at least two people. The printer weighs
approximately 50 kg (110.3 lb) and must be lifted carefully.
Setting up the printer after transporting it
The steps you need to take to set up the printer after transporting
it are almost identical to the steps carried out the first time you
set up the printer. When you set up the printer again, see the Setup
Guide, and note the following points.
❏ Do not forget to remove any protective materials.
❏ Do not forget to pull the green tab on the left side of the print
head to release the print head.
c
Caution:
Do not push down the green tab; otherwise you may break it.