User's Manual

ESC k
Format:
ASCII code:
ESC k n
Decimal: 27
107 n
Hexadecimal: 1B 6B n
Select Typestyle Family
Comments:
This command affects only the Letter Quality typestyle, not draft.
If n = 0, the Roman typestyle in the printer is used. To select one
of the other typestyles, use the family number of the font as
shown below. For example, to choose the Prestige font, use 3 for
the value of n. The following values can be used for n:
0: Roman
5: OCR-B
1: Sans Serif
6: OCR-A
2: Courier
7: Orator
3: Prestige
8: Orator-S
4: Script
Typestyle families 2 to 8 are available only if the appropriate font
module is installed, such as the Multi-Font Module.
Overrides the SelecType panel setting.
ESC !
Format:
ASCII code:
ESC ! n
Decimal:
27 33 n
Hexadecimal: 1B 21 n
Master Select
Comments:
Selects any valid combination of the following modes: 10 cpi, 12
cpi, proportional, condensed, emphasized, double-strike, double-
wide, italic, and underline. For details on how to set n, see
Selecting Typestyles With Master Select in Chapter 4.
Command Summary 9-23