User's Manual

ESC J
Perform nll804nch Line Feed
Format:
ASCII code: ESC J n
Decimal:
27 74 n
Hexadecimal: 1B 4A n
Comments:
Advances the paper n/180 of an inch. The value of n must be
from 0 to 255. This command produces an immediate line feed
but does not affect subsequent line spacing and does not produce
a carriage return.
VT
Format:
ASCII code: VT
Decimal:
11
Hexadecimal: 0B
Tab Vertically
Comments:
Advances the paper to the next vertical tab position in the channel
selected by ESC /. If no channel has been selected, channel 0 is
used. If no vertical tabs have been set, the paper advances one line.
ESC B
Set Vertical Tabs
Format:
ASCII code:
ESC B nl n2 . . . 0
Decimal:
27 66 nl n2 . . . 0
Hexadecimal: 1B 42 nl n2 . . . 00
Comments:
Sets up to 16 vertical tabs in the current line spacing. Tab settings
are not affected by subsequent changes in line spacing. The tab
settings are entered as nl, n2, etc
.-all from 1 to 225, in ascending
order. The 0 value (null) indicates the end of the command. All
settings are stored in channel 0 (see ESC b). ESC B 0 clears the tab
settings.
Command Summary
9-17