User's Manual

ESC ( -
Select/Cancel Score
Format :
ASCII code:
ESC ( - nl n2 m dl d2
Decimal:
27 40 45 nl n2 m dl d2
Hexadecimal: 1B 28 2D nl n2 m dl d2
Comments:
Use decimal or hexadecimal values for all variables, not ASCII
characters.
Use the following values for the first 3 variables:
nl must be 3
n.2 must be 0
m must be 1
The value of dl determines the location of the score:
dl = 1 for underline
dl = 2 for strikethrough
dl = 3 for overscore
The value of cL2 determines whether the score line is single,
double, broken, or continuous:
CL! = 0 Cancel the score line selected by d1
d2 = 1 Single continuous line
d2 = 2 Double continuous line
d2= 5 Single broken line
d2 = 6 Double broken line
The last three bits of d2 determine the characteristics of the score
line as shown below:
Bit 2
Bit 1
Bit 0
On (1)
Broken Double
Single
line
line on line on
Off (0)
Continuous
Double
Single
line line off
line off
Notes: If Bit 1 and Bit 0 are both off, the selected score is
cancelled. Double line and single line scores cannot be
combined at the same score position.
9-29