User's Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
3.
Press the
LOAD/EJECT
button to load an envelope. Then press the
ON LINE
button to start printing.
Using the cut sheet feeder
After stacking paper in
the
cut sheet feeder, be sure that the
ON LINE
light
is lit. When the printer is on line, a new sheet of paper loads
automatically whenever a printable character or line feeding command is
sent to
the printer. Subsequent sheets are automatically loaded as needed.
Note:
Be sure that you run the self test described earlier in this chapter
the first time you use the cut
sheet
feeder and whenever you change to
a different paper size.
When the selected paper bin is empty,
the
printer automatically goes off
line and the
PAPER OUT
light goes
on.
To resume printing, stack more
paper, then press the
ON LINE
button.
Note: If you turn off your printer during a paper out or paper jam
condition, any data remaining in the printer’s buffer is discarded.
Using Printer Options
7-13