Administrator's Guide

196 EpsonNet WebAssist
About Web browser setting
When running EpsonNet WebAssist, be sure not to use a proxy
server to access the Internet. If Access the Internet using a
proxy server is selected, you cannot use EpsonNet WebAssist.
Use the following steps to clear the check box.
1. Right-click the Internet Explorer icon on the desktop, and
then select Properties.
2. Click the Connection tab.
3. Clear the Access the Internet using a proxy server check
box.
Configuring the Print Server Using EpsonNet
WebAssist
After you have assigned an IP address to the print server using
EpsonNet WinAssist, MacAssist, or the arp/ping command, you
can configure the print server using EpsonNet WebAssist.
Note:
❏ A web browser must be installed on your computer.
❏ TCP/IP must be correctly set for the computer and the print server.
❏ Do not run both EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist at the same time.
❏ Your browser may restrict some characters you can use. For details,
see your browser or OS documentation.
❏ If you are using the dial-up environment and not using NetWare,
select Disable in the NetWare screen. If Enable is selected, the
extra account might be charged when you are using the dial-up
router.