Owner's Manual

9. To determine the network information you need to enter, print a network status sheet. Press the

Setup button on the control panel, select Network Settings, and press the OK button. Select

Confirm Network Settings and press the OK button. Press either of the Start buttons to print a

status sheet. (Press the Stop/Reset button if you want to cancel the operation.)

10. Locate the IP address on the network status sheet you just printed and enter it as the Printer Name

or IP Address in the Add Printer Wizard window. Click Next.

11. Click Finish.

You see this window:

12. Click Have disk.

13. Click Browse.

14. Locate and open the folder you unzipped in a previous step.

15. Do one of the following:

• If you are installing the PCL printer software, select EPUP6SETUP.inf and click OK.

• If you are installing the PostScript printer software, select eppsnt.inf and click OK.

You see a window like this: