Administrator's Guide

• Windows (other versions): Click or Start, and select All Programs or Programs. Select

EpsonNet and click EpsonNet Config.

• OS X: Open the Applications folder, open the Epson Software folder, select EpsonNet, select

EpsonNet Config, and double-click the EpsonNet Config icon.

After a few moments, the program displays the connected products.

4. Double-click the product you are configuring.

Note: If several products of the same model are connected, you can identify them by their MAC

address.

5. From the menu on the left, select Network Interface, select TCP/IP, and select Basic.

You see a window like this:

6. Enter the product's IP address, Subnet Mask, and Default Gateway settings in the fields provided.

Note: To connect the product to a secure network, enter a static IP address. You can also configure

the DNS settings by selecting DNS, and enter proxy settings by selecting Internet from the TCP/IP

menu.

7. From the menu on the left, select Network Interface, select Network, and select Basic (Wireless).