Administrator's Guide

Setting Options/Description

EAP Type Select one of these authentication methods for connections

between the product and a RADIUS server:

EAP-TLS or PEAP-TLS: You must obtain and import a CA-

signed certificate

PEAP/MSCHAPv2: You must configure a password

User ID Enter an ID for authentication on a RADIUS server

Password Enter a password for authentication of the product

Confirm Password Enter the authentication password again

Server ID Enter a server ID for authentication on a specified RADIUS

server; server ID is verified in the subject/subjectAltName field

of a server certificate sent from the RADIUS server

Anonymous Name If you selected PEAP-TLS or PEAP/MSCHAPv2 as the

Authentication Method setting, you can configure and

anonymous name instead of a user ID for phase 1 of a PEAP

authentication

Encryption Strength Select one of the following encryption strengths:

High for AES256/3DES

Middle for AES256/3DES/AES128/RC4

Parent topic: Connecting the Product to an IEEE802.1X Network

Configuring a Certificate for an IEEE802.1X Network

If your product supports IEEE802.1X, you can configure a certificate for the network using Web Config.

1. Access Web Config and select Network Security Settings.

2. Select IEEE802.1X and select Certificate.