Quick Reference Guide

20 | Creating Media Configurations
• Select these settings using the information supplied with your media:
Note: The Heating & Drying setting is especially important, and includes several sub-settings.
• Print a nozzle check pattern and clean the print head, if necessary. See page 23.
• Perform an Auto Feed Adjustment. See page 21.
• Perform an Auto Head Alignment. See page 21.
• Select the Setting Name for the media and print.
Creating Media Configurations
1. Press the Menu button.
2. Select Media Setup and press OK.
3. Select Customize Settings and press OK.
4. Select the media bank setting number (1 to 30) you want to use for this media type and press OK.
5. Select the settings for your media.
Setting Name Feed Adjustment
Platen Gap Head Alignment
Heating & Drying Media Suction
Head Movement Multi-Strike Printing
Roll Type Tension Measurement
Media Tension Feed Speed