Owner's Manual

Basic Operations 33
Cutting paper manually using the built-in cutter
1. Press the ) button. Viewing the interior of the printer without opening the printer
cover, press the d button to align the cut location with the mark on the right side of
the printer’s interior.
2. Press the OK button.
The paper is cut by the built-in cutter.
Removing Roll Paper
This section describes how to remove and store roll paper after printing. The pressure
rollers may leave impressions on paper that is left in the printer.
Note:
The minimum length of paper that can be cut with the built-in cutter is fixed at 2.4 to
5 inches (60 to 127 mm) and cannot be changed. If the cutting position is shorter than
the shortest length above, the paper has to be automatically fed to that length; thus
a margin will have to be left. Cut off the margin with a commercially available cutter.