Owner's Manual

1-62

62 | Setting Up the Printer

3. The printer is now prompting you to choose the best block in the group

labeled

K2 in row #1.

4. Use your own eye loupe or the one that came with the printer to

determine which block has the least visible vertical line. In this example,

the middle block (numbered 5) is the best choice.

5. If number 5 is the best block, press

Enter to accept it (5 is the default

setting). Otherwise, use the

u or d button to select the number of the

best block, then press

Enter.

6. Repeat this process to examine the remaining blocks in row #1: C, M,

Lc, Lm, and Y. In each case, select the number of the best block, then

press

Enter.

7. Repeat this process to examine the groups of blocks in rows #2 and #3.

IMPORTANT: Do not enter an adjustment value for K1 when

prompted, or your color alignments won’t be accurate.

8. When done, press Pause to exit the head alignment. The printer will

remember your alignment values and use them when printing.

#1 L

at t

s group

Note

You must use at least a

10× eye loupe to check

the pattern.

Look for the block with the smallest gap

Note

If number 5 is the best

block in each group, the

print head is already

properly aligned. Press

Pause to exit the head

alignment early.