Network Guide

Setting Up Your System for Network Printing 13
Windows 7 and Windows Vista
For Windows 7 and Windows Vista, use the following procedure to install the
necessary components.
Note:
❏ The Windows operating system CD may be required during the installation.
❏ When using TCP/IP for printing, you need to set the IP address, the subnet mask,
and the default gateway of the computer.
1. Click , click Control Panel, and then click View network status and
tasks or double-click Network and Sharing Center.
2. Click Local Area Connection (Windows 7) or View Status (Windows
Vista), and then click the Properties button.
Note:
If you see the User Account Control screen, click Yes or Continue.
3. Check if the following network components are in the list. If they are
already installed, go to “Connecting the Network Printer to the Network” on
page 17.
The following table lists the network components required for configuring
the network interface with EpsonNet Config.