Owner's Manual

3 Make sure the printer is turned on and not printing, then open the
printer cover.
4 Press the
E load/eject button and hold it down for three seconds until
the print head moves to the left and the P power light begins flashing.
5 Pull up the ink cartridge clamp. The cartridge rises up from its holder.
6 Lift the cartridge out of the printer and dispose of it carefully.
7 Lower the new ink cartridge into its holder with the label facing up and
toward the back of the printer. Then press down the ink cartridge
clamp until it locks in place.
8 If you need to replace the other ink cartridge, repeat steps 5 through 7
before going on to step 9.
To avoid damaging
the printer, never
move the print head
by hand.
Don’t open the clamp
or remove a cartridge
except to replace it
with a new one. Once
you remove a
cartridge, you can’t
reuse it, even if it
contains ink.