Basic manual

Macintosh Users

This section tells you how to set up the printer so that you can use it on an

AppleTalk

network.

First, you need to install the printer software on the computers in the network,

following the instructions on the Start Here card. Then, you must select the printer in

the Chooser.

Selecting the Printer in the Chooser

1. Turn on your printer.

2. Open the Chooser from the Apple menu and click the SC 900(AT) icon.

3. If you are using AppleTalk zones,

select the zone you want to use. A list

of all the printers connected to the

selected zone appears on the right.

Click the name assigned to the

EPSON Stylus COLOR 900.

4. Click the Background Printing

buttons to turn background printing

on or off.

5. Close the Chooser.

basics.book Page 43 Friday, January 8, 1999 11:57 AM