Parts User Manual

Introduction

Macintosh System Requirements

To use EPSON Stylus RIP with a Macintosh in either a

standalone or network environment as a print server, your

system should meet the following minimum requirements:

◗ Power Macintosh,

iMac

™

series, or Power Macintosh G3

or G4 series

◗ At least 16MB of available RAM for the EPSON Stylus

RIP software (20MB or more is recommended), in

addition to the RAM needed by your operating system and

other applications

◗

At least 52MB of free hard disk space to install the software

and at least 150MB of free hard disk space for processing large

files

◗ Macintosh Operating System 8.5.1 or later

◗ CD-ROM drive

◗ Serial, Ethernet, or USB connection to the printer. The

USB connection can be either a built-in USB port or the

EPSON USB Adapter kit (part number C-USB-PK4).

To set up a Macintosh as a client on a network using the

EPSON Stylus RIP, your system must have the following

minimum configuration:

◗ Macintosh Centris,

Macintosh Quadra,

Performa,

Power

Macintosh, iMac series, or Power Macintosh G3 or G4

series

◗ Ethernet

™

AppleTalk

connection with the Macintosh set

up as the EPSON Stylus RIP print server

◗ 8MB RAM

◗

At least 2MB of free hard disk space to install the software and

at least 150MB of free hard disk space for processing large files

◗ Macintosh Operating System 7.6.1 or later

◗ CD-ROM drive

Nflight.bk Page 3 Friday, September 1, 2000 8:32 AM