Quick Start Manual

ManualsBrandsEpson ManualsPrintersEpson Epson Stylus C82N

EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

EPSON disclaims any and all rights in those marks.

Install Software

Macintosh OS 8.6 to 9.x

1 Make sure the Macintosh is properly connected to the network, and then turn it on.

Make sure the printer and print server are still on.

2 Put the EPSON Printer Software CD-ROM

in the drive.

3 Double-click the EPSON icon in the

CD-ROM window.

The EPSON Installation Program

window appears.

4 Double-click Install EPSON Stylus C82N

Printer Driver.

5 Follow the on-screen instructions to install the

driver, and then restart the Macintosh.

6 After the computer restarts,

open the Chooser.

7 Select the C82 Series icon, set

Background Printing to On, and then

close the Chooser.

8 Optionally, double-click the EPSON icon

in the CD-ROM window to open the EPSON

Installation Program window, and then do any of the following:

• Install the printer movies and Reference Guide. To do this, double-click Install

Printer Movies and Reference Guide. Then, double-click the EPIC icon on

the desktop to view the printer movies or the Reference Guide.

• Install the EPSON Software Film Factory, a photo management program.

To do this, double-click Install EPSON Software Film Factory (you may have

to scroll down to see this option), and then follow the on-screen instructions.

• View the print server Administrator’s Manual. To do this, double-click View

Administrator’s Manual. If you don’t have Adobe Acrobat Reader, install it

when prompted.

9 Click the icon to close the EPSON Installation Program window, and then remove

the CD-ROM from the drive.

Macintosh OS X

1 Make sure the Macintosh is properly connected to the network, and then turn it on.

Make sure the printer and print server are still on.

2 Put the EPSON Printer Software CD-ROM in the drive. Double-click the EPSON icon

on the desktop to open the CD-ROM window.

3 Double-click the C82Series icon in the

CD-ROM window.

If you set up an administrator password when

you installed OS X, you see this screen:

Click the lock icon, type your

administrator name and password,

and then click OK.

4 Follow the on-screen instructions to install

the driver, and then restart the Macintosh.

5 Open the Applications folder on your OS X drive, open the Utilities

folder, and then double-click the Print Center icon.

6 If there are no printers in Print Center, the following

dialog box appears. Click Add.

If the Printer List window appears,

click Add Printer.

Macintosh OS X continued

Select EPSON AppleTalk in the list at the top of the

dialog box, click your printer in the list that appears,

and then click Add.

Your printer appears in the Printer

List window.

8 Close Print Center.

NOTE: Make sure you select the

Stylus C82 in the Print Setup dialog

box in the applications you use.

9 Optionally, do any of the following:

• Install the printer movies and Reference Guide. To do this, double-click Printer

Information Center in the CD-ROM window and follow the on-screen instructions.

Then, double-click the EPSON Printer Information icon on the desktop to view the

printer movies or the Reference Guide.

• Install EPSON Software Film Factory, a photo management program. To do this,

double-click Film Factory Installer in the CD-ROM window and follow the

on-screen instructions.

• View the print server Administrator’s Manual. To do this, double-click

Administrator’s Manual.pdf in the CD-ROM window.

10 Remove the CD-ROM from the drive.

Continue

Follow the steps in the appropriate section below to install the printer software on

Windows

XP, 2000, and NT 4.x, or on Macintosh

. To install on Windows Me, 98, or 95,

see the Supplement booklet.

NOTE: These procedures set up the printer for TCP/IP printing on Windows, and for

AppleTalk printing on Macintosh. For other network protocols, such as NetWare or

NetBEUI, see the Administrator’s Manual.

NOTE: All computers that use the printer with TCP/IP must be in the same IP subnetwork.

Windows XP, 2000, NT 4.x

1 Make sure the computer is properly connected to the network, and then turn it on.

Make sure the printer and print server are still on.

2 Put the EPSON Printer Software CD-ROM

in the drive.

The EPSON Installation Program

window appears.

3 Double-click Install EpsonNet InstallWizard.

Follow the on-screen instructions to

install the InstallWizard on the computer.

An EpsonNet InstallWizard icon

appears on the desktop.

4 Double-click the EpsonNet

InstallWizard icon. InstallWizard

searches the network, finds your

printer, and displays it in a dialog

box. This can take 20 to 30 seconds.

NOTE: InstallWizard may find

more than one printer. Identify

the printer by the name listed

on the status report you printed

out in section 5, “Connect the

Print Server.”

5 Select the check box next to your printer

and click Next.

InstallWizard automatically installs the printer driver and configures the printer port.

This takes about 10 seconds.

6 Make sure there is letter-size plain paper in the printer, and then click the Print button to

print a test page. If the test page prints, the installation is successful.

7 Optionally, install Status Monitor, which is a utility to monitor and control the printer.

To do this, double-click Install EPSON Status Monitor, and follow the instructions on

the screen.

NOTE: Status Monitor creates some network traffic, so you may want to limit the

number of users who have Status Monitor installed on their workstation. You can

also turn it on and off. See the Supplement booklet for more information.

8 Optionally, do any of the following:

• Install the printer movies and Reference Guide. To do this, double-click Install Printer

Movies and Reference Guide (you may have to scroll down to see this option).

Then double-click the EPIC icon on the desktop to view the printer movies or the

Reference Guide.

• Install EPSON Software

Film Factory

,a photo management program. To do this,

double-click Install EPSON Software Film Factory (you may have to scroll down

to see this option), and then follow the on-screen instructions.

• View the print server Administrator’s Manual. To do this, double-click View

Administrator’s Manual (you may have to scroll down to see this option).

If you don’t have Adobe

Acrobat

Reader

, install it when prompted.

9 Click the icon to close the EPSON Installation Program window,

and then remove the CD-ROM from the drive.

Questions?

Here’s where to look for answers:

Printer Basics book

Learn about loading paper, printing, maintaining the printer, solving problems,

and contacting EPSON.

Supplement booklet

Tells you how to install printer software on Windows Me, 98, and 95, and provides general

information about the network software utilities. The Supplement also includes instructions

for turning Status Monitor off and on.

Printer movies and Reference Guide

Learn more about using the printer. Double-click the

EPIC icon (Windows, Mac OS 8.6 to 9.x) or the

EPSON Printer Information icon (Mac OS X) on

the desktop, and then click either Print Show or

Reference Guide. If you have not installed these,

see section 6, “Install Software,” for instructions.

EpsonNet External Print Server

Administrator’s Manual

Provides information about using the print server, network utilities, and other operating

systems and network protocols (NetWare, NetBEUI, OS/2, UNIX, and others). Double-click

View Administrator’s Manual in the EPSON Installation Program window (Windows,

Mac OS 8.6 to 9.x) or double-click Administrator’s Manual.pdf in the printer software

CD-ROM window (Mac OS X).

Continue