Owner's Manual

51
You see incorrect characters.
■
Make sure the interface cable is
securely connected and meets the
system requirements on page 55 or
page 56. Then try printing again.
■
Make sure your printer is selected
in your application, or as the active
printer in the Macintosh Chooser.
■
If you’re using a switch box with
your printer, connect the printer
directly to your computer.
The wrong number of copies prints.
Check the Copies setting in both your
printer software and application. If
you’re running Windows, check the
Copies setting in the Windows Print
dialog box.
There are scratch marks on your
print.
If you’re printing on Premium Glossy
or Premium Semigloss Photo Paper,
prints have a tendency to scratch if not
handled properly. Don’t place objects
on top of your prints, and be careful
not to scratch them with your
fingernails. For best results, frame your
prints under glass.