Owner's Manual

Mixed text/graphics mode
This feature is for software that has problems printing scalable
font text combined with graphics. Leave the mixed
text/graphics mode set to off unless you notice problems in
your printout.
Auto line feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed
(LF) code. If your printed
text is unexpectedly double-spaced, set this feature to off. If
text lines print on top of each other, set it to on.
L oading position
When you want to print more lines on a page, set this feature
to 3 mm. For example, with
ACsize paper and the loading
position set to 8.5 mm, you can print 65 lines per page with
l/6 inch line spacing, but with the 3 mm setting you can print
66 lines. If you set the top margin in your software, that setting
is added to the default-setting value.
Changing the default settings
To change the printer’s default settings, you use the control
panel buttons; the control panel lights show your selections.
Follow the steps below to make your changes:
1. Make sure the printer is turned off and paper is loaded in
the paper feeder.
2. Hold down the Pause button and turn on the printer to
enter the default-setting mode.
-
Using Other Printer Functions
2-13