Owner's Manual

This command would select italic proportional print. In

BASIC, the same command would look like this:

LPRINT CHR$(27) “!” CHR$(66);

You can make up your own combinations quite easily. This is

possible because each print style has its own value you can use

with the Master Select command. To create a “custom” Master

Select Code, add the values of the print styles you wish to com-

bine. The values of the print styles are as follows:

Elite

Proportional

Compressed

Emphasized

Expanded

Italic 64

Underlined

128

For example, if you want to find the code for elite emphasized

italic print you would add these values:

Elite

Emphasized

Italic

The Master Select Command you would use would look like

this:

<ESC> “!” 73 (in BASIC: CHR$(27) “!” CHR$(73);)

Note:

Proportional overrides pica/elite. Compressed works only in

draft print.

Some of the more popular styles the SQ-2000 can produce are

shown on the next four pages. The number following each exam-

ple is the ASCII code (decimal) which will select that particular

print style.

Proportional print styles are shown first. These styles are avail-

able in both the letter quality and draft sets. The next page shows

the printing styles that are available in the letter quality set. The

final two pages show the printing styles that are available in the

draft set.