Owner's Manual

ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefgh
BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghi
CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghij
DEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijk
EFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijkl
FGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklm
GHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmn
HIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmno
IJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnop
Figure l-14. Self-test
9 Self-Testing the Printer
To self-test the printer, follow these steps:
l First, be sure that you have a sheet of paper at least 8½ inches
wide loaded into the printer.
l Be sure the DIP switches under the dust cover are set to match
the setting below:
Figure l-15. DIP switch setting for self-test
l Adjust the paper pressure bar as shown in Step 8.
l Turn OFF the printer using its ON-OFF switch.
Now, turn ON the printer while holding down the LF button.
The printer will immediately begin printing out the self-test
characters shown above.
To stop the test, simply turn OFF the printer, or wait for it to
stop when it reaches the bottom of the page.
17