Owner's Manual
Table D-l. Column DIP switch setting for printing area
Switch
Number of Width
SW-1 SW-2 SW-3 columns*
(inch)
Paper shape and size
OFF
OFF OFF
65
71/8
OFF
OFF ON
75
8¼
OFF ON
OFF 78 8½
B5
vertical
A4 horizontal
US. letter vertical
OFF ON ON
80
9½
ON
OFF
OFF
94
10¼ B4 vertical
ON
OFF ON
102 11 US. letter horizontal
ON ON
OFF
109
11¾
A3 vertical
ON ON ON
136
14% B4 horizontal
SW-4
ON: When using the optional cut sheet feeder
OFF: When not using the optional cut sheet feeder
*In normal (pica) character size.
Interface DIP Switch Panels
These switches customize the printer for the type of computer
you have. As mentioned, up to four different switch panels may
be provided depending on your interface. Full details are given
in the manual that came with the interface. If you did not receive
the manual, consult your dealer. You may need it later, even if the
dealer installed the interface for you.
Here we’ll tell you how to set the two groups of switches that
are common to all interfaces.
Interface DIP switch Panel 1
The switches on Panel 1 of the interface have the functions and
settings shown in Table D-2.
Table D-2. Interface DIP switch Panel 1 settings
Switch Function
ON (up)
OFF (down) Factory setting
SWI-1 2K-byte buffer
Disabled
Enabled OFF
SW1 -2
Not used
- -
OFF
SW1 -3
Automatic line
LF added
LF needed
OFF
feed
by printer
from computer
SW1 -4
Control ROM
See next page
OFF
selection
D-4