User's Manual

To insert a hard disk drive, align the guiderails on each side

of the drive with the notches on each side of the drive bay

and slide the drive all the way into the bay, as shown

below. Secure the guiderails to the computer case with the

two retaining screws.

notch

Connecting the Cables

To connect the drive to the computer, you need to connect two

cables: a drive ribbon cable and a power supply cable. The

steps below describe how to connect these cables to the drive.

If you are installing a diskette drive, follow step 1 and then skip

to step 3. If you are installing a hard disk drive, start with step 2.

3-24

installing and Removing Drives