User's Manual

EPSON AcuLaser C1100 Revision B

DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 462

4.13.16 HARNESS-ASSY FEED 1

REMOVAL

1. Remove 500 PAPER FEEDER ASSY. (p.452)

2. Remove COVER LEFT 500. (p.453)

3. Unclamp the clamp fastening the harness of HARNESS-ASSY FEED 1.

4. Disconnect connector (P/J435) from PWBA-TRAY 500.

5. Unhook the 2 hooks fastening HARNESS-ASSY FEED 1 to 500 PAPER

FEEDER ASSY, and remove HARNESS-ASSY FEED 1.

REINSTALLATION

1. Pass the connector (P/J43) on HARNESS-ASSY FEED through the hole on 500

PAPER FEEDER ASSY.

2. Attach HARNESS-ASSY FEED 1 to 500 PAPER FEEDER ASSY, and fasten

with the hook.

3. Connect connector (P/J435) to PWBA-TRAY 500.

4. Fasten the harness of HARNESS-ASSY FEED 1 with the clamp.

5. Attach COVER LEFT 500. (p.453)

6. Attach 500 PAPER FEEDER ASSY. (p.452)

Figure 4-162. Removal of HARNESS-ASSY FEED 1

Table 4-16. Symptoms when the connector is loose

Connector

No.

Panel Indication Symptom

Error Caused by Connector

Disconnection

P/J435 Service Req E547

Printing is not

possible.

Paper Feeder cannot be detected.

Leg_Sec03_026FA

5)-2

5)-1