User's Manual

Connecting to a Computer

1. Connect the round end of the main cable to the projector’s

Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are

connecting a second computer.)

2. To use the remote control as a wireless mouse, connect the PS/2 or

USB cable included with the projector to the MOUSE terminal

on the square end of the main cable.

3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to the

external mouse port or connect the USB cable to the USB port on

your laptop.

Note: If your laptop uses a serial mouse, perform steps 2 and 3 using

the PC serial mouse cable instead of the PS/2 or USB cable (not

shown in the illustration).

80009000.book Page 31 Monday, November 1, 1999 9:35 AM