User's Manual

Managing Projectors 83
2. Click Register projector. You see this screen:
3. Click
Auto detect to locate projectors currently operating on the
network, or click
Manual registration and enter the projector’s
network IP address.
Any projectors found on the network are listed as shown below:
4. Select each projector you want to add by clicking its name, then
clicking the
Add button. When you’re done, click Close.
Click here
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 80 to
configure your projector for
a wired network.
Click here