User's Manual

20 Displaying and Adjusting the Image

Selecting the Image Source

Selecting the image source lets you switch between images input from

different pieces of connected equipment (such as a computer or DVD

player).

If you don’t see the image you want, press the

Source Search button

on the remote control or the projector repeatedly until you see the

image you want to project on the screen.

You can also select your image using the

Source buttons either on the

projector or the remote control as follows:

■ The projector has two Source buttons. Use the

Computer/Component button to switch between equipment

connected to the

Computer/Component ports.

Use the

Video/S-Video button to switch between equipment

connected to the

Video and S-Video ports.

■ The remote control has four Source buttons. Use them to switch

between devices connected to the ports identified on each button.

(The PowerLite 830p does not support EasyMP.

)

You can preview all sources on one screen to help you select the

desired source (see page 35).

note

To focus and adjust the

image, see page 24. If a

projected image fails to

appear, see page 21 for help.