Operation Guide

Using the control functions
35
The following table shows the meanings of the control buttons.
* If the button does not function, you can switch the input source using the
button.
q
• Some connected projectors may not be equipped with all of the above ports
or functions. If you click a button for a port or function that is not
available, nothing will happen.
Power On Turns the projector power on.
Power Off Turns the projector power off.
Switch source
Computer1
Switches the input source to the Computer1
port or Computer port.
Switch source
Computer 2
Switches the input source to the Computer2
port.
Switch source
BNC
Switches the input source to the BNC port.
Switch source
S-Video
Switches the input source to the S-Video port.
Switch source
Video (RCA)
Switches the input source to the Video port or
video2 port.
Switch source
Video (BNC)
Switches the input source to the Video1 port.
Switch source
SDI
Switches the input source to the SDI port.
Switch source
HDBaseT
Switches the input source to the HDBaseT
port.
Switch source
DisplayPort
Switches the input source to the DisplayPort
port.
Switch source
DVI-D, HDMI 1
Switches the input source to the DVI-D1 port
or HDMI1 port.
If the projector is equipped with either a
DVI-D port or HDMI port, use this button to
switch the input signal.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
DVI-D as an input source.
Switch source
DVI-D, HDMI 2
Switches the input source to the DVI-D2 port
or HDMI2 port.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
HDMI as an input source.
Switch source
D-Video
Switches the input source to the D4 port.
Switch source
EasyMP
Switches the input source to EasyMP or
EasyMP.net.
Switch source
USB Display
*
Switches the input source to USB Display.
Switch source
USB1
*
Switches the input source to the external
equipment connected via a USB (Type A) port
or USB1.
Switch source
USB2
*
Switches the input source to the external
equipment connected via a USB2 port.
Switch source
LAN
*
Switches the input source to the image
projected by the computer via a network.
Switch source
Whiteboard
Switches the input source to Whiteboard.