User's Manual

36
Presenting from a Laptop or VCR
Connecting to a Video Device
Follow the steps below to connect the projector to a VCR, DVD
player, or any other video device that has RCA-style (composite video)
connectors. Before starting, make sure the projector and your video
device are turned off.
1. Connect the yellow RCA plug on one end of the RCA video cable
to the projector’s
Video
port. Connect the other end of the cable
to the video-out port of your video source.
2. To use the projector’s built-in speaker system, connect the RCA
audio cable to the left and right
Audio
ports of the projector
(insert the white plug into the
L
port and the red plug into the
R
port). Connect the plugs at the other end of the cable to the audio
output ports of the video source.
When done making the connections, turn to “Displaying and
Adjusting the Image” on page 37 to start your presentation.
note
To connect using S-video or
component (BNC) video, see
the projector Administrator’s
M
anual.
RCA audio cable
RCA video cable