Owner's Manual

Installing the Interface Card
1. Make sure that both the printer and computer are turned off
and that all power and interface cables are removed from
the printer.
e
Caution:
Avoid touching the printer circuits or card circuit board
contacts. Otherwise, you may damage them.
2. Turn your printer so that its interface cover or shield plate
faces you.
3. Use a screwdriver to remove the screws securing the cover or
shield plate; then lift it off.
ActionLaser 1000/1500 EPL-8000
4. Slide the interface board into the grooves in the interface slot.
Push it in firmly to make sure it connects to the printer’s
internal socket.
ActionLaser 1000/1500 EPL-8000
2