Owner's Manual

DIP Switches
Print direction for graphics
The printer ordinarily prints text bidirectionally for speed and
prints graphics characters unidirectionally for precise vertical
alignment. You can, however, change text printing to unidirectional
with the software command ESC U 1.
If you want to increase printing speed, you can change graphics
character printing to bidirectional by turning DIP switch 1-5 on. If
DIP switch 1-5 is off, graphics character printing is unidirectional
whether or not you use ESC U o.
High-speed draft
By setting DIP switch 1-6 on, you can print at up to 330 cps
(characters per second) if you select the 12 cpi draft font. The
printer reduces the number of dots in each draft character to
increase the printing speed.
If you select emphasized printing or condensed printing during
high-speed draft mode, printing speed temporarily switches to
normal draft speed until the enhancement is turned off. Also, if a
line contains superscript, subscript, dot-graphics, or downloaded
characters, printing speed switches to normal draft speed for that
line only.
Input buffer capacity
The input buffer stores data sent from your computer. If you want
to free your computer for other tasks while the printer prints, turn
DIP switch 1-7 off to select the 8 KB input buffer.
3-10
Using the Printer