Owner's Manual

Paper Handling
The following section guides you through problems in handling
single sheets and continuous paper. If you are having problems
using the optional cut-sheet feeder, see the section on options
starting on page 6-10.
Single sheets do not feed properly.
l When you insert single-sheet paper, the platen does not
rotate and paper does not feed.
Check that the paper-release lever is pushed back to the
single-sheet position.
The paper may be too far to the right. Align the left edge
guide with the arrow mark on the paper guide.
l When you insert the paper, the platen rotates but paper
does not feed.
Reinsert the paper more firmly.
l Printing starts too low on the page, or the bottom part of
one page is printed at the top of the next page.
Be sure to choose the correct printer when you choose a
printer from your application program’s menu. See Chapter
1.
If possible, specify single-sheet paper with your application
software.
Use your application software to reduce or eliminate the top
margin and reduce the page length.
Reduce the lines-per-page setting in your software.
6-8 Troubleshooting