Owner's Manual

The Interface Boards

Installing the board

There are two basic types of interface board designs, which slightly

change the way they are installed in the printer. The frame ground

(FG) wire is attached for one type and

not

attached for the other.

This difference does not affect the operation of the interface in any

way. Check to see which type of interface board you have and then

follow the instructions for that type of board.

FG wire not attached

FG wire attached

If the FG wire is

not

attached, follow these steps:

Set the DIP switches on the interface board according to the

manual accompanying your interface board.

5-48

Using the Printer Options