Owner's Manual

6.
Raise the continuous paper support on the paper path guide.
7. Press the ON LINE
button. The printer loads continuous paper
and goes on line.
Note:
l
With the paper release lever forward and the printer off line,
the control panel functions normally, allowing you to use the
micro-adjustment feature to finely adjust the loading position
of your paper.
l
If you wish to use the short tear-off feature, you can tear off
the perforation of
the
continuous paper at the cut sheet
feeder's tear-off edge. See Chapter 3 for more information on
the short tear-off feature.
CAUTION:
Never attempt to print on labels when the cut
sheet feeder is installed.
5-18
Using the Printer Options