Owner's Manual

ESC B
Set Vertical Tabs
Format:
ASCII code: ESC
Decimal: 27
Hexadecimal: 1B
Comments:
B (n1) (n2) ... 0
66 (n1) (n2) ... 0
42 (n1) (n2) ... 00
Sets up to 16 vertical tabs in the current line spacing. The range of n
is 0 to 254. the values of n must be entered in ascending order. Ter-
minate this tab sequence with 0 or a number less than that of the last
tab. Tab settings are not affected by subsequent changes in line
spacing.
ESC b
Set Vertical Tabs in Channels
Format:
ASCII code: ESC
b
(c) (n1) (n2) ... 0
Decimal:
27
98 (c) (n1) (n2) ... 0
Hexadecimal: 1B
62 (c) (n1) (n2) ... 00
Comments:
c = 0 to 7
Sets up to 16 vertical tabs for channel c.
The tab settings can be cleared by giving a value of zero to nl. The
range of n, given in lines, is 0 to 254. Tab settings are not affected by
subsequent changes in line spacing.
ESC I
Select Vertical Tab Channel
Format:
ASCII code: ESC
Decimal :
27
Hexadecimal: 1B
I
(c)
47
(c)
2F (c)
Comments:
This command is used to select the vertical tab channel, where c has
the value 0 to 7.
I-18