Owner's Manual

Setting Up the Printer 1-17

R4C3730

Rev. B

A5 size CHAP1.FM

5/10/99 Pass 0

Proof Sign-off:

<Crestec> _______

<Kimura> _______

<Crestec> _______

For information on opening and using the software, see "Using

the Printer Software" in Chapter 4. Also see "Using EPSON Status

Monitor 2" in Chapter 6.

Installing the printer software in Windows 3.1 or NT 3.5x

Follows the steps below to install the printer software for

Windows 3.1 or NT 3.5x.

Note:

Installing the printer software for Windows NT 3.5x may require

network administration privileges. Ask your network administrator for

more information.

1. Make sure Windows is running and the Program Manager

window is open.

2. Insert the printer software CD-ROM shipped with your

printer in the CD-ROM drive. (If you are using diskettes,

insert it in a disk drive.)

3. Choose Run from the File menu. You see the Run dialog box.

In the Command Line box, type D:SETUP, (If your CD-ROM

drive has a drive letter other than "D" or if you are using a

diskette substitute the appropriate drive letter.) Then click

OK.

❏ If you wish to make a diskette version of the printer software

on your CD-ROM, type EPSETUP instead of SETUP. In the

dialog box that appears, click the Driver disk creation utility

button and follow the on-screen instructions.

31run.tif