Owner's Manual

C-2 Specifications
R4C3730
Rev. B
A5 size APPC.FM
5/10/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: High speed draft 400 cps at 10 cpi
maximum
Draft 300 cps at 10 cpi
Letter quality 100 cps at 10 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-in. or programmable in 1/360-in.
increments
Printable columns: 136 columns (at 10 cpi)
Resolution: 360
·
180 dpi maximum (letter quality)
360
·
360 dpi maximum (raster graphics)
Interfaces: One standard bidirectional, 8-bit, parallel
interface with IEEE 1284 nibble mode support
and one optional interface slot
Paper feed methods: Friction (front or top paper entry)
Rear push tractor
Front push tractor (optional)
Pull tractor (optional) (front, bottom, or rear
paper entry)
Push and pull tractor (optional)
Cut-sheet feeder (optional)
Roll paper holder (optional)
Paper feed speed: Continuous 5 in./second
Intermittent 60 ms/line at 1/6-in. line
spacing