Owner's Manual

Using Continuous Paper
5. Make sure your paper has a clean, straight edge. Open both
sprocket covers and fit the first four holes of the paper over the
sprocket pins.
,_:’
6. Close the sprocket covers.
Y
,;i
7. Adjust the right sprocket to remove any slack in the paper. Lock
the sprocket unit in place by pulling the sprocket lock forward.
8. Attach the front cover.
9. Turn on the printer. When the printer receives data, it
automatically loads the paper before printing.
Removing paper from the front push tractor
1. To remove continuous paper, press the TEAR OFF button to feed
the paper’s perforation to the tear-off edge of the printer cover.
Note: If the page perforation does not meet the tear-off edge, you
can adjust the tear-off position using the micro-feed feature. See
Chapter 3.
2. Tear off the paper.
3. While holding down the ALT button, press the EJECT button to
feed the continuous paper backward out of the printer and into
the paper-park position.
2-12 Paper Handling