User's Manual

Table 1-1. Monitor/video curd
compatibility
Monitor
Monochrome
Color or
Enhanced color
Video card
output type
Monochrome or graphics
One 9-pin output
FL
or enhanced graphics
compatible)
Graphics or color graphics
One 9-pin RGB output, or one
or enhanced graphics
RCA-type jack for composite
video
3.
4.
5.
Plug the monitor’s power cable first into the power inlet on the monitor
and then into an electrical outlet. If a monochrome monitor has the
proper type of plug, you can plug it into the auxiliary outlet next to the
power inlet at the back of the main unit. The monitor’s power consump-
tion must not be more than 80 watts.
When you check the DIP switch settings, as defined later in this chapter,
be sure they are set correctly for the type of monitor you have.
If you have trouble getting a display, check that the brightness and con-
trast controls on the monitor are set correctly. Monitors usually have
their own power switches. Make sure the power switch is on.
6
Connecting the Keyboard
Follow these steps to connect the keyboard:
1.
Open the cover at the lower right front corner of the main unit, as
shown in Figure 1-6.
i
KeyPqard
SocKeI
cover
Figure 1-6.
Opening
the keyboard socket cover
1-8