User's Manual

You can use the backspace key to make corrections. When

the time is correct, press [Enter. If you enter an invalid

time-for example, a number greater than 23 for the hours

or greater than 59 for the minutes or seconds-the

computer ignores your entry. Try again.

To set or change the date, highlight Date and press IEnter

You see this template:

mm-dd-yyyy

(“mm” stands for month, “dd” stands for day, and “yyyy”

stands for year.)

Enter the date in the exact format shown in the box. Use

two digits for the month and day and four digits for the

year; the Setup program automatically inserts the hyphens

(-). For example, to set the date for March 29,1992, you

would type the following:

03291992

You can use the backspace key to make corrections. When

the date is correct, press IEnter If you enter an invalid

date-for example, a number greater than 12 for the month

or greater than the number of days in that month-the

computer ignores your entry. Try again.

Press

once or twice to return to the main Setup menu.

Note

The Setup program automatically saves the time and date

when you press

after typing each one. If you then exit

the Setup program without saving your changes, the new

time and date still take effect.

Running the Setup Program

2-19